Forum Replies Created
-
Posts
-
Re: Hoover Maxi 6 TC50 Tumble dryer on/off switch problem
Undo all the screws around the door opening.
Penguin45.
Re: Whirlpool AKZ151/IX oven F03 fault code
Technically, it’s a configuration error. If the board worked on somebody elses machine, it’s a fluke as they are configured on a model specific basis..
Worth checking the temperature probe for function. It’s a thermistor device, so the resistance will change with temperature. You will need a multimeter capable of working in kOhms.
Power off first,
Penguin45.
Re: bosch halogen hob
He’s got power to the plates. They will only function properly with a loaded saucepan on top – even then, they will still cycle.
Penguin45.
Re: Bosch WFO2064GB/01 not taking softener
With patience, the top of the soap box can be removed, and the inner panel teased out for proper cleaning.
Put your model number into http://www.boschcustomerservice.com for exploded diagrams of how it all fits together.
Power off first.
Penguin45.
Re: Hoover AC110 wash problem?
I think you should check the condition of the tacho magnet on the end of the motor and the resistance through the coil which surrounds it.
Power off first.
Penguin45.
Re: Zanussi ZWF 12070
If the drain pump runs continuously, regardless of what programme you selct, it’s almost certainly a pcb failure.
Due to the costs involved, I would seriously advise seeking professional help on this one.
Penguin45.
Re: elux esi6100w
Dispenser is fired by the the pcb, so either that’s faulty or there is a corruption issue feeding back through the pcb. Heater is good candidate, motor capacitor possible.
Chris.
Re: Prima Lpr600 pump
You wait for the latest one – Askoll pump with heater in the housing. Inspired…….
Not.
Chris.
Re: Hotpoint WD420 dryer light flashing.
Dryer LED in the vertical row of lamps is LED1. If it’s flashing then it’s F08 – heater relay failure, which, as we all know by now is 99{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} certain a board fault.
Chris.
