Forum Replies Created
-
AuthorPosts
-
Penguin45
ParticipantRe: Help on old Zanussi washer
Mike,
How are you powering the machine? UK/Euro voltage is 230/240v.Penguin45.
Penguin45
ParticipantRe: Appliance Specification
I think Andy wants to know if its an oil seal, a V wiper seal or a sprung carbon seal and counterface set-up.
Chris.
Penguin45
ParticipantRe: Welcome To A New Way Forward
Well said Andy.
Bear in mind that the independant repairer is already a salesman. Every time that we complete (and get paid for!) a repair, you have effectively made a sale, so this is the next logical step. We have the advantage that we are “on the spot”, the customer may well know and trust you from previous calls and has not fallen into the clutches of some spiv in a suit at the local shed!Personally, I think the real clincher is going to be “We designed this”. It speaks volumes for the technical abilities of our trade that now have enough influence and support to build a properly engineered machine when compared with some of the cheap tat out there today.
Regards,
Chris.Penguin45
ParticipantRe: Can anyone help? Washing Machine not going!!!
Hi K (and K)
Proceed as follows:
Hold the “temperature down” button, then push “power”. Hit “spin up” and you’re in diagnostics. Report back with which lights on the wash progress panel light up and we should be able to tell you something.Regards,
Penguin45.Penguin45
ParticipantRe: Hotpoint FD61 Dishwasher
If there is a little bit of water under the sump filters at the end of the programme, it ain’t blocked.
Regards,
Penguin45.Penguin45
ParticipantRe: Help on old Zanussi washer
Mark – post up a picture of the old pump motor will you? I have a suspicion about what has happned.
Thanks,
Penguin45.Penguin45
ParticipantRe: Zanussi washer FJ1033 – flooding problem
Having pulled the plug first, of course………..
Penguin45.
Penguin45
ParticipantRe: F&P SMARTdrive is smarter than me..
Could be drain pump running. Faulty pressure switch could activate the pump if stuck in flood protection mode, possible module fault.
Run diagnostics as outlined at top of the forum and post your answers.
Regards,
Penguin45.Penguin45
ParticipantRe: First Photo
That’s the beauty of modern production techniques – you can run it down to the wire.
Chris.
Penguin45
ParticipantRe: Recommended Listening
May not be around for that one……….. 🙁
Chris.
Penguin45
ParticipantRe: Zanussi FLE1015W module configuration
The configuration secrets are all revealed on the TDS disc, which you can get for around £20 – possibly the best £20 you’ll ever spend.
Chris.
Penguin45
ParticipantRe: Recommended Listening
New Kate Bush album as well. I confess, all these years later, I am still profoundly and deeply in lust. 😀

Chris.
Penguin45
ParticipantRe: First Photo
Prototype……… I think it’s going to be white now anyway. Kev’s been listening. Shame, I like silver (not because it reminds me of fish…..) and it goes with anything.
The Proline T1000 (Balay) was launching in my Comet days – the prototype finished up in Central Stores and wasn’t actually painted at all!
Keep reading……
Chris.
Penguin45
ParticipantRe: I need a new dishwasher
I dunno, try and give an honest opinion, the boss has been in already. Nice to see that (independently) we are of one mind. 😀
Penguin45.
September 30, 2005 at 9:27 pm in reply to: Washing Machine / Siemens / Siwamat 263 / New main Handle #148932Penguin45
ParticipantRe: Washing Machine / Siemens / Siwamat 263 / New main Handl
:wave:
-
AuthorPosts
