Forum Replies Created
-
AuthorPosts
-
September 30, 2005 at 9:26 pm in reply to: Washing Machine / Siemens / Siwamat 263 / New main Handle #148930
Penguin45
ParticipantRe: Washing Machine / Siemens / Siwamat 263 / New main Handl
P/no 050093, showing as still available. We usually call it the timer knob BTW 😀 .
Email to spares@ukwhitegoods.co.uk quoting number for prices, ordering etc.
Regards,
Penguin45.Penguin45
ParticipantRe: I need a new dishwasher
Buy either of them and you’ll finish up on christian name terms with your repairer……..
How about the Bosch SGS43T52 at £249.95? 2 year parts and labour warranty is attractive, extended warranty available if required.
Regards,
Penguin45.Penguin45
ParticipantRe: Hotpoint FF92S
Harry,
If you would like to contribute the general well being of UKW, have a read of this and then sign up!http://www.ukwhitegoods.co.uk/modules.p … age&pid=48
Regards,
Chris.Penguin45
ParticipantRe: WMA 20P replacement Drum /bearings
We’re getting to an interesting point with these machines. My personal opinion is that they’re junk. You can fill them with nice new parts, and they’re still junk. Now that they’re hitting the 5 year mark I take great joy in giving the death rights. Replace with a Bosch and NOW (deep and profound joy) we will be able to offer the UKW “X” machine – a whole life solution.
So let’s stop worrying about these and look forward to a better future, yes?
Chris.
Penguin45
ParticipantRe: OCEAN WA295 MOTOR
Yup, PM the addy and I’ll sort it. BTW superglue and a thread binding on the step works a treat as well – not had one re-fail 😀
Chris.
Penguin45
ParticipantRe: Vestfrost
Danish oufit, have been making Comet’s “quality” range for many years. Wasn’t aware of them selling “own brand” in the UK.
Penguin45.
Penguin45
ParticipantRe: Zanussi TDS383W Tumble Dryer
I’m 99.9{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} certain there’s a modification kit for this very problem – Martin or Dave, check in documents on TDS (Mine’s not working at the moment 🙄 ) for this model.
Penguin45.
Penguin45
ParticipantRe: servis washing machine stuck in spin mode
Model number is located on the inside of the filter flap, it begins with M and 4 digits. The same info is on a label on the rear upper casing as well.
And yes – it is crucial to fault finding, especially on the Servis range of washers.
Regards,
Penguin45.Penguin45
ParticipantRe: UKW Calendar 2006
I’ll have one, as long as r600a is doing the photos and isn’t actually in them,
Penguin45
ParticipantRe: whirlpool awg349/1
Er, SMEG built washer dryer chaps………..
Got to be hinge or door seal Swerv – buckled or bulging.
Regards,
Penguin45.Penguin45
ParticipantRe: Bosch SGS5312GB – Not pumping out?
3 different UK versions, fortunately all use the same board. P/no for computer board is 264877, £97.53 plus p+p plus VAT. Order from http://www.bshappliancecare.com.
Be absolutely certain of the diagnosis as they will not accept it back under any circumstances.
Regards,
Penguin45.September 29, 2005 at 12:00 am in reply to: Bosch SGS6342GB/07 Dishwasher Blown board Tracks #148655Penguin45
ParticipantRe: Bosch SGS6342GB/07 Dishwasher Blown board Tracks
You’ve got a short somewhere Simon – the heaters do blow occasionally, but you’re going to have to check everything. These ones don’t seem to do the broken wire in door thing, so it’s got to be a component failure. Motor and heater are the only things that draw any real current so start there.
Chris.
Penguin45
ParticipantRe: Which Fridge Freezer?
If you have a run through the Mistral threads in the Refrigeration forum, you will notice that the thermistors fail with alarming regularity and the boards occasionally. 3 in 12 months? I don’t think so……. Also, bear in mind that if you go for a new Hotpoint, you’ve still got the same engineer looking after you……..
Regards,
Penguin45.Penguin45
ParticipantRe: Miele W806.
Like a wardrobe door! Remove two screws from soap box surround, 3 bolts around the door opening, spring clip in the filter opening and Bingo!
Chris.
Penguin45
ParticipantRe: Connecting outlet pipe on Hotpoint DF53
Qualtex used to supply a “screw-and-glue-in” rubber cuff for just this circumstance. Dave_Conway will be able to advise you more fully when he spots this.
Regards,
Penguin45. -
AuthorPosts
