Forum Replies Created
-
AuthorPosts
-
Penguin45
ParticipantRe: neff integrated washing machine/ dishwasher
“Neff” is the integrated brand name used by Bosch, so decent quality, make sure that you get the two year warranty (just in case).
Regards,
Penguin45.Penguin45
ParticipantRe: Tricity Bendix AFL AW1054W
Wot are you like Conway? 😆
Penguin45
ParticipantRe: Firenzi FIDW41 Not filling
The pressure chambers trap air as the water level rises, this is displaced into the pressure switches to control the water level.
Regards,
Penguin45.Penguin45
ParticipantRe: Tricity Bendix AFL AW1054W
132093-20/8 – cycle indicator £8.64 list 😯 .
Chris.
Penguin45
ParticipantRe: Zanussi ZWD1680 Washer Dryer – Dilemma
Most continental machines are designed to run on concrete floors, not our wooden suspended floor. Putting carpet under the feet raises the machine off the floor and exacerbate the problem.
Bear in mind that 1600 spin is totally excessive, which will lead to short bearing and motor life and as you are finding, big vibration problems.
As your retailed has been kind enough to offer an exchange, plump for an 11/1200 machine and things should improve markedly.
Regards,
Penguin45.Penguin45
ParticipantRe: Look at what your missing
I have received 6 unique calls and 2 repeats through UKW Repairs@ since it started, yielding over £600……… And it cost me half an hour filling out the forms.
SIGN UP!
Chris.
Penguin45
ParticipantIt’s a chuffing Zanussi – it’s on TDS and it doesn’t have the usual IWMS – it’s got a separate double pressure chamber set-up with double pressure switches. Bet it’s still sludged up though.
Penguin45.
Penguin45
ParticipantRe: Bosch not taking in enough water
Regret numbers supplied incorrect – cannot access Bosch files. Please recheck for numbers engraved into top inner edge of door,or label on top edge of casing.
Regards,
Penguin45.Penguin45
ParticipantRe: Firenzi FIDW41 Not filling
Mat,
You are looking for a small chamber on the r/h side at the bottom of the machine, with two hoses and two round blocks attached to it – these are the pressure switches and chambers. They must be clean of all residues, also check feed hoses running back across the machine.Safety first……..
Regards,
Penguin45.Penguin45
ParticipantRe: Diplomat ADP8234 error code E9
It certainly is – a thorough rodding out with a tie-rap usually does the trick; a long skinny bottle brush is even better.
Regards,
Penguin45Penguin45
ParticipantI don’t recall “flippers” in Little Britain?
Chris.
Penguin45
ParticipantRe: Taking a Long time to go through cycle
So what was it then? We’re all itching to know……..
Penguin45.
Penguin45
ParticipantRe: Pingu
Excellent. Anyone know what Gegsy was talking about BTW?
Chris.
Penguin45
ParticipantRe: Whats the most annoying thing customers do?
You’re learning Simon………. 😆 😆
Chris.
Penguin45
ParticipantRe: Trade Access
We mentioned this before somewhere – long term we need to get it on the site as part of the “joining as a member” page.
Chris.
-
AuthorPosts
