Forum Replies Created
-
Posts
-
Re: Baumatic BDW13 error code 23
Faults are indicated as “E–” on these Chinese machines; most commonly E4 – leak into base.
I cannot suggest why the display should show 23.
Penguin45.
Re: Help please flooding Zanussi DCE5655
Water level in this machine is controlled by a diaphragm or “pressure” switch. There is an air bell in the sump, which traps air as the water level rises. The air is forced up a small hose to operate the switch. The air chamber may be full of sludge, the hose may be blocked or the switch may have failed. It is also possible that the pcb is not turning off the ater valve when the pressure switch trips.
Power off if investigating.
Penguin45.
Re: Smeg DWI1612c leaking – can i repair it?
A strip and thorough clean will usually solve this problem. Re-assembly with a smear of silicoln sealant will help as well.
Penguin45.
Re: Kelvinator Washer by F&P Smartdrive GW503 wont Start
Have you read the Sticky at the top of the forum? It tells you how to read the binary code from the diagnostics without an LCD screen.
Generally if it won’t do much the lid switch and out of balance switch is a good place to start.
Penguin45.
Re: WTA Commitee – Elections for 2009/11
We now have two nominees to fill the vacancies arising on the WTA Comitee:
Bazza500 (Barrie Munro)
Steven (Steven Withers)Given that the original final date for nominations to the Commitee was 16.8.9., I now declare that nominations are closed.
The WTA Commitee hereby asks the Membership to elect its Commitee for the next two years as follows:
Lawrence Carey
Chris Chantrell
Barry Munro
Adrian Whelke
Steve White
Bryan Williams
Steven WithersA formal ballot will be held at the UKW/WTA meeting at the end of September.
Please raise any points or issues in by posting in this thread.
Chris Chantrell,
Secretary to the Commitee,
Whitegoods Trade AssociationRe: September 2009
Right, have PM’d Baz and Steven to let them know that they have access to this forum.
Will post “closure, please vote” post.
Chris.
Re: wma63
Article on motor brushes HERE. With a WMA series machine, you are best advised to remove the motor to inspect.
Power off first please.
Penguin45.
Re: Hoover HCA391FFK Fridge Freezer Door Handles 34000327
41003903 – handle upper
41003904 – handle lower
91625418 – fridge gasketlaurenceuk wrote: are they straight forward to fit?
No idea…….. 😀
Chris.
