Forum Replies Created
-
Posts
-
Re: dwi612c smegg d/w
Blown mains suppressor, dodgy solenoid on dispenser can cause weird behaviour. Got to say yours sounds like a straight pcb failure.
Chris.
Re: Diplomat D/W ADP8322 7 flashes
http://shop.ukwhitegoods.co.uk/Dishwash … amber.html
Yes it does…… Bad contacts at pcb on fill chamber is a very common problem, failed reed switch as well.
Chris.
Re: Hoover (Gias) Engineers No Work
Why not download the form and fill it in honestly, Lee. First time I did it, I got a nasty surprise.
Chris.
Re: 10 – Drumming
I simply took the rear panel off and reached in from there. Bit of patience and fiddling about getting the pads fully rubbed down into place, but quite straightforward really.
You need an automotive panels place – they keep all the prep and finishing stuff as well as just panels. Mine were special order – next day delivery.
Chris.
Re: Whirlpool AWO/D 6730 dont start (totally without electri
Plug something else into the washing machine socket and see if that works. If it does, the problem is in the machine. The mains suppressor is at the back of the casing, next to where the main power cable enters the machine. They go bang regularly. If that is OK, the problem is probably in the computer board which runs the machine.
Hope that’s clear enough.
Penguin45.
Re: Ikea / Whirlpool DWF 406 W – Error code 02
Power off, decor door panel off (Slacken screws 2 + 4 on the door edge), remove lower front panel. Towels down, bend front edge of tray downwards and the water should run out. Mind the edges – you can shave with them.
Penguin45.
Re: B&Q DW60bI dishwasher top spray arm
The only people who copy Indesit dishwashers are Chinese…..
Chris.
Re: In search of the fourth cord
“Scrambled eggs”. Just a magnificent cryptic clue, once you get inside the compilers head. Now we just need to do it for some of our posters.
Chris.
