Forum Replies Created
-
Posts
-
Re: In search of the fourth cord
Oh, come on – it’s the finest cryptic clue ever. If you’ve got the 4, you’ll have twigged that the letters were mixed up a bit……
(It took me two days when I first came across it, followed by a Doh! moment)
Chris.
Re: New makers!!!!!
China. The rest doesn’t matter. Please forward 4 cans of Old Speckled Hen via the Kilmarnock adress.
Penguin45.
Re: Servis M6135 washing machine – Pressure switch
Two different ones, depending on the serial number. This the one that starts with 9, normally.
Penguin45.
Re: Neff showing F04
Looking through the choices, it’s motor, no drain or heating when it shouldn’t. Assuming it’s a washer built by Bosch and not A SMEGGY one, in which case, in which case it’s an NTC error…….
:snig:
:p45:
Re: bosch maxx WFL2050
Single level plus flood protection – extra terminal will run the drain pump, so might be stuck?
Chris.
Re: Candy D3R Drier
Old 3kg jobbie? Try 421307843972 – Crosslee genuine p/no for rear felt seal.
Chris.
Re: eezespares “^{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}$£”£${e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}^&
£27.66 from BSH.
Chris.
Re: hover Hod6615 help please
Salt lamp is integral with the pcb as far as I can see, so, power is getting there. This would imply a pcb failure.
Penguin45.
Re: re Neff Int d/w dead
If it’s dead dead, it’s the pcb every time – power supply will have died.
Chris.
Re: Zanussi ZWF 1437 W – Noisey Spin
Not really – you’ve a machine manufactured down to your budget and you bought it.
Set your budget somewhat higher and do your research. As an ISE agent, I would point you at http://www.iseappliances.co.uk – our machines don’t suffer these problems.
You absolutely will get what you are prepared to pay for.
Penguin45.
