Forum Replies Created
-
Posts
-
Re: 08/09-Football Season..
Message from Iadom (on a boat in the Med):
“Congratulations to Alfuckem on Burnley making it into the Premiership”.
Chris.
Re: User manual for GALA GMB 95Q washer/dryer
The machine looks very similar to the Merloni-built ones. I have emailed you a manual which may be suitable.
Penguin45.
Re: Zanussi dryer TC491D (91672004604) drum?
Nope, back should be attached. Drum is 1255121947.
Chris.
Re: fl 1012 zanussi
There is no rear bearing – there is a one piece double “sleeve” bearing fitted on these. Fitting involves removing the pulley and the cast iron crosspiece for access.
Bearing kit is ZN0501 – spares@ukwhitegoods.co.uk will be able to supply one for you promptly.
Penguin45.
Re: F&P smartdrive 703 problems
Cold water valve is a 12v proportional fill device and is subject to problems. Good practice is also to check wiring and function of lid switch and out of balance switch – both are subject to corrosion and damp problems.
Penguin45.
Re: looking for an F&P smartdrive
F+P toploaders have neve been sold in the European market – the few that I have worked on have all been brought over by their owners.
It might be simpler for you to track down a scrap LG DirectDrive machine – the motor is essentially very similar.
Penguin45.
Re: Zanussi DA6142 drain doesn’t go. Help!
Continuity test back to timer unit is your next step. Possible that the loom has broken at the door pivot point. If you do have continuity, switching problem in the timer is the culprit.
Penguin45.
Re: Changing temp at which hot water is used
Hot water valve is turned on by a cam operated switch on the front of the vari-stat.
Penguin45.
Re: Indesit DI450 Slimline – Salt light blinking and not wor
TTT,
I do apologise – I have disabled your account in error (suspicious looking gmail address). Please contact admin@ukwhitegoods.co.uk for re-activation.I also haven’t got a specific answer to your query, although it does sound as if the computer is faulty.
Do not be tempted to touch the salt/regeneration tank – it is not relevant to this problem.
Penguin45,
Moderator.Re: Spam
Oops…… locked out user thomthomthom. Stupid sounding gmail addess. He’s broken his Indesit d/w.
Sorry about that,
Chris.Re: Hotpoint CTD40G Flashing Lights
F13 – Rear temperature sensor (NTC) is not working.
The NTC is supplied as part of the thermostat kit to be found in the shop@ facility on the site. Note that there is choice of two kits, dependent of the serial number of your dryer.
Power off if you intend to tackle this yourself.
Penguin45.
Re: Zanussi DA6142 drain doesn’t go. Help!
Have a look at THIS PICTURE. Centre part of the tongue is the lock.
Penguin45.
