Forum Replies Created
-
AuthorPosts
-
Penguin45
ParticipantRe: Whirlpool motor coupling SRLSQ8000JQA
4819 325 28035
Chris.
Penguin45
ParticipantRe: Aldi LED Headlight
The bike clips alone would do it for me……. :snig:
:p45:
Penguin45
ParticipantRe: APM 8512 Washing m/c doesn’t spin at high speed .
Evenin’ Clive :waving:
Penguin45
ParticipantRe: APM 8512 Washing m/c doesn’t spin at high speed .
Out of Balance. Classic problem with these cheap built-ins.
Penguin45.
Penguin45
ParticipantRe: Aldi LED Headlight
rolf wrote:the old lead lamp. 😉
Bit heavy, but then, I’m very small…….
:p45:
Penguin45
ParticipantRe: Ariston AWD12
Remove plug and lid. Plug on end of wiring has probably fallen of the dryer selector switch. Push it back on and it ought to work.
Penguin45.
May 19, 2009 at 6:53 pm in reply to: Whirlpool ADG 7440 start 4 beeps + flashes 30 sec pump run #287011Penguin45
ParticipantRe: Whirlpool ADG 7440 start 4 beeps + flashes 30 sec pump r
Replacement water level indicator is HERE.
The diaphragm works the switch, if it gets clagged up, it doesn’t. The switch is a “light action” microswitch – the spring mechanism in the switch can fail.
Penguin45.
Penguin45
ParticipantRe: Bosch SMS 6702 GB/09
Schematics, p/no and ordering are available on http://www.bshappliancecare.com – follow the links into the eShop.
Penguin45.
Penguin45
ParticipantRe: Hotpoint DWF50N 29714597
C00094686 -> 31017
C00143207 31017 ->Chris.
Penguin45
ParticipantRe: Zanussi D/W
Granvilles PetroPutty works for me……
Chris.
Penguin45
ParticipantRe: CIC324AK foamed in sensor
Done.
Chris.
Penguin45
ParticipantRe: smeg DF410SDX no power!
If you’ve got power at and through the switch, the next component in line is the PCB……… Typically £130 – £170 – be very sure if you are going to replace it.
Future readers should be aware that UKWhitegoods does not condone any form of live testing – a continuity test with a test meter would have sufficed in this instance.
Penguin45,
Moderator.Penguin45
ParticipantRe: dodgy extension lead
Phidom wrote:I have to go to a small fish processing factory tomorrow
May I join you…….?
:p45:
Penguin45
ParticipantRe: Lost Bangle – Broken access cap to filter!
Once again – the filter will not turn because there is a foreign object jammed in the inlet to the pump. Please re-read the original reply; it tells you exactly how to proceed.
Penguin45.
-
AuthorPosts
