Forum Replies Created
-
Posts
-
Re: Bosch SGV43A03GB pump runs continuously/ refuses reset
Water in the base – flood protection activated.
Penguin45.
Re: Smeg DWF612SS leaking from matrix/sump
Grrr – can’t find a part number. spares@ukwhitegoods.co.uk will usually source through a wholesaler if they hold the parts – much quicker. I can only suggest that you drop them an email – their technical info is far more complete than mine.
Penguin45.
Re: Caple WMI2004
Might be a SMEG – there’s a safety level on the p/sw, so that’s got to be a good bet.
Chris.
Re: sgs43a22uk fd8209 bosch overfill
Looks like it’s a timed-fill machine. Fill is set initially by the float tripping and the machine then pumping a fixed amount of water back out. The computer the calculates how long to fill before the float trips.
1/ Did you fit the correct Bosch inlet valve – flow rate is critical?
2/ Is the float free to move, is it the right way up if you’ve removed it for cleaning?Otherwise, the only control is the pcb. I think there’s a mod – one of the BSH lads may be able to advise on that one.
Chris.
Re: Indesit Dishwasher No Heat
Sounds like the relay on the pcb is dropping out under load. If the h/p switch wasn’t working, you’d get the blocked filter error.
Chris.
Re: Indesit Door
Oh yes it is….
C00115842 – Door assembly.
The only door spare part is the catch kit. If it’s the lug where the pin goes through that’s broken, you can drill a couple of cunning holes and use a tyrap to pull it all back together.
Chris.
Re: servis washing machine not working
Exploding pcb was always a good one with these. What’s the model number?
Penguin45.
