[Pigpen4]

Re: Hotpoint WF340PB lights flashing

They’ve gone off as a pair to EMW, along with the old module.
I’ll let you know what the outcome is.
Cheers,
Pigpen.

[Pigpen4]

Re: Hotpoint WF340PB lights flashing

Thanks, Dave.
Were there any obvious signs of damage on the top panels that you replaced, or were the faults hidden inside the components, undetectable to the human eye?
Cheers,
Pigpen.

[Pigpen4]

Re: Ariston w/m A1636S spinning before draining

Thanks, chaps, I’ll take up your advice when the customer’s next “off shift” and let you know what happens.

[Pigpen4]

Re: Ariston w/m A1636S spinning before draining

Yes it does, with a full load in, but not when testing with no load in and just a regular fill of water.

Is there anything above on this machine that could be blocked? It’s not the detergent inlet, as it’s coming back up from there to go out through the soap drawer.

Thanks for all your posts so far, Gents.
Pigpen.

[Pigpen4]

Re: Whirlpool Oven AKZ161/WH hot oven problem

Thanks for that.
I’ll get one ordered and take it along.
Cheers,
Pigpen.

[Pigpen4]

Re: Indesit F/F NBAA 33NFNXD

Thanks for that, Peterjay, I’ll go round and check it this afternoon. 🙂

[Pigpen4]

Re: Sterling GH60 Gas Hob knobs

Thanks for that, Loaf.
Currently out of stock at Connect and MasterPart, though.
Anyone know where they might be in stock?
Thanks,
Pigpen.

[Pigpen4]

Re: Zanussi DE6544 D/W motor pumping strangely

Thanks for that, Seamy.
I’ve just been out to it and the motor’s screaming like a banshee, so it sounds like a new motor is required, too.
We’ve decided to send it to the dishwasher house in the sky and they’re going to get a new one.
This poor old machine has had a good innings, doing at least 3 washes a day in a council offices’ kitchen, so they’ve had their money’s worth.

[Pigpen4]

Re: Zanussi DE6544 D/W motor pumping strangely

Not sure, off the top of my head.
Would that cause the motor to pump when it’s not supposed to? Or is it actually supposed to continue trying to pump when the machine hasn’t got enough water for it to pump?

[Pigpen4]

Re: Miele W800 w/m Pre Wash light flashing

Anyone?
Please?

[Pigpen4]

Re: Ignis D/W ADL347 replacement control module

Thanks, John.
Looks like I’ve got a 50{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} chance of getting it wrong, then, as it is a bottom mounted board.
Do either of the bottom mounters (ooh er, missus!) need programming, or should they both come already programmed?
And does my original fault sound like a control board change to you?
Thanks,
Paul.

[Pigpen4]

Re: Ignis D/W ADL347 replacement control module

Control board is WHP481221478282
Don’t have number for machine and the owner (15 miles away) can’t see any other numbers.
I bet I’ve got the wrong board, haven’t I? Didn’t realise they differed!
I’ll wait till the NTC comes in before I go back to get the machine number.

Lesson learnt – get the 12 digit number every time!!

[Pigpen4]

Re: Indesit Wi121 w/m selector spins but no light

Changed main board and pressure switch and it all worked nicely.

[Pigpen4]

Re: Hoover T/D HNV380-80 Drum Support Wheels

Thanks, Helo75, that’s exactly the one, also available on Connect as Bearing wheel (5045173712959), now that you’ve identified it for me.

Many thanks,
Pigpen 🙂

[Pigpen4]

Re: Bosch dishwasher not filling SGS43A52

My apologies, and thanks for the corrections.
Of course, it makes sense that that’s what that microswitch is for.
I think I’ll keep my head down and learn a bit more before jumping in feet first in future!!
As I said, I’m still learning … 😳

[Author]

Posts