Forum Replies Created
-
Posts
-
Re: whirlpool AWO3961 display ok, but dead
I dont Know, its 7or8 kg, a machine i cant remember ever working on before
i think its about 2 years old,
Its not even fillingRe: aeg door problem
I had this problem ,
I shaved some plastic off the striker where it touchs door, so it closed more onto the interlockRe: sticks last 2min, AEG W/D
It was an unevon load
I didnt notice it had one towel in drum
Most machines would just finish without spinning,
well i learned something.Re: Length of manufacturer’s guarantees
you can see why they dont gaurantee some parts,
If somebody fits a timer and its not the fault, they might try and send it back
as faulty.
For timers and modules you cant beat E.M.W
they take them back and just charge a small retesting chargeRe: sticks last 2min, AEG W/D
two boards on this, I assume its the main board
Do they come allready calibratedRe: Hotpoint, wm53 motor to fast
YES check wiring between timer plug and motor plug and give motor plug wires a wiggle is one of the first things i do,
I most have takon that motor off a writeoff machine without knowing what the fault was on that machine,
I was ready to tell them to call Hotpoint, i am glad i got it in the end,
AND i most not put 2nd hand spares on the shelve without knowing they are O K.Re: Hotpoint, wm53 motor to fast
I Started at the beginnig again, pluged in another motor=the same,
Tryed a defferant motor=perfect,
The problem was the motor i pluged in at the beggining (not new) had the same fault, what are the chances of that.Re: Hotpoint, wm53 motor to fast
It is going at spin speed when it should be distributing and then it reverses after a second or 2 without slowing :hmm:
Re: Hot and Cold Fill Hoses
Went to a under gaurantee job many years ago,
customer was giving me a hard time as soon as i walked through the door, IT had flooded the flats below.
they used garden hose as fill hoses
he assured me a plumber had done it,
It was nice telling him it was a botch job and charging himwow that’s an expensive module, thanks for your help with this i am gonna see if she wants it done 🙂
Re: miele dish, hose most not be vertical ?
Thanks Seamy,
Next time you speak to technical help, if they have such a thing, could you ask,
Maybe information has been passed down the line and has been distorted.Re: Vent Tumble Dryer through Chimney
Only buy a condensing dryer if you have to,theres so much more to break down on them,
Boiler engineers have large core cutters for boiler vents (hole in the wall) they might charge a lot but it should still be cheaper then the extra for condenser dryer,
phone a around for a engieer who needs work
