Forum Replies Created
-
Posts
-
Re: Merloni Smart Card Readers
canufixit wrote:
bzz67 wrote:
we always use EMW much easier + they will fix any damaged components and very often tell you what may have caused the fault.
no other way for me ……….emw all the time…….
and me ,plus you can send it back, if u cant cure it
canufixit 😆Re: Zanussi DA 6142 No D/Washer
HI
has it got pcb in front to select program ,if so it faulty send it to tony @emw.Re: Integrated son of a b****
What i do is this if it looks hard to get out i just walk away form it advise them get it ,went to neff d/w once it wedge it ,they have scrap the machine , 😆
Re: Fridge explosion
turbodry wrote:Have seen exactly the same on an Ocean F/F, just enough gas if leaked into the enclosed fridge cavity to mix at a highly explosive ratio … all you need is the spark then BOOM. The one we saw blew the roof off the conservatory and the remains on the fridge door were bent into a V shape by it’s impact with the wall opposite. It also managed to move a stud partition wall!
The owner naively thought that a bottle of fruit juice had exploded.that r600 gas for you 😥
Re: smeg di612 quits
eastlmark wrote:sounds like an over-fill. this one can suffer a pcb failure that ignores the pressure switch sginal and continues to fill.
😆
Re: AEG induction hob.
aqualectric wrote:Well, stripped this hob this morning and the PCB was blown. Distriparts only list the rings and PCB cluster as one complete unit – £934.00 retail. :conf:
Not really expecting to get the go ahead, methinks…… :rolls:Thanks for the advice,
Steve.
hi sent back to a.e.g ,how old is it?Re: Attention CDA Agents…………..
wards wrote:same boat here i,m afraid.september last year all my work stopped with one certain company,but this has given me a wake up call not to put all my eggs in one basket,once your services are no longer required these companies drop you without any hesitation,better off sourcing your own customers and building up your own reputation. 🙂 🙂
Been there and got t shirt, i am not far from u mate sunny bilston 😆
Re: Whirlpool AWG320/4
PGS wrote:The above m/c is a servis. The problem is that when prog is selected the fill pulses 1 sec on 1 sec off. Ive megered all components and replaced interlock and pressure s/wchecked for blockages and leaks on press system. Even hung a motor on but exactly the same. Seems to be pointing to module but ive never had this fault, so confimation would be helpful before I order. Cheers Paul.
check heater ? if not that might be module wht not try e.m.w.
Re: commercial ice maker help needed
drinkywinky wrote:Hi Pup thanks for the kind email sorry i havent had chance to reply yet
no worries mate
