ray.t

Forum Replies Created

Viewing 15 posts - 76 through 90 (of 254 total)
1 2 3 … 5 6 7 … 15 16 17
  • Author
    Posts
  • February 7, 2019 at 6:19 pm in reply to: Zanussi ZWD71460NW 91460390300 dryer not working #460300
    ray.t
    Participant

    Thanks Dave, its raythomasandson@hotmail.com

    February 6, 2019 at 6:45 pm in reply to: Zanussi ZWD71460NW 91460390300 dryer not working #460298
    ray.t
    Participant

    I called back to this one today and sure both the wires had broken. I repaired them just to see if it would work again but its just the same as it was before. The E73 error still comes up. Do you have to clear the error code for it to work again?
    Thanks,
    Ray

    February 2, 2019 at 3:59 pm in reply to: Zanussi ZWD71460NW 91460390300 dryer not working #460297
    ray.t
    Participant

    Hi Dave,

    Thanks for that, I will check it out.

    September 17, 2018 at 7:44 pm in reply to: BUSH Range Cooker element? #457949
    ray.t
    Participant

    Re: BUSH Range Cooker element?

    Try these people, they sorted me out with a grill element for a Bush cooker that I couldn’t find with all the normal suppliers.
    https://www.partsplace.co.uk/

    August 21, 2018 at 5:40 am in reply to: Bosch HBN56M551B/10 Double oven #457474
    ray.t
    Participant

    Re: Bosch HBN56M551B/10 Double oven

    Hi Dave,

    No I didn’t. It has a resistor that appears to be inline to the fan, no power to this either. I checked last night and from looking at the exploded diagrams on the Bosch site it has a normal selector switch. I haven’t seen this model before, I was thinking the switches would be part of the control/pcb assy.
    I will get back today and dig a bit deeper.

    Thanks,
    Ray

    May 10, 2018 at 8:48 pm in reply to: Neff U1524N0GB/10 , no heat #455823
    ray.t
    Participant

    Re: Neff U1524N0GB/10 , no heat

    Just found this online.

    Using the oven selector switch, switch back and forth from fan oven to conventional oven 5 times until 333 is displayed. Then the oven should work. The display 444 means that the lock program has been initiated.

    Got to be worth a try.
    Ray

    May 10, 2018 at 8:45 pm in reply to: Neff U1524N0GB/10 , no heat #455822
    ray.t
    Participant

    Re: Neff U1524N0GB/10 , no heat

    Hi, sure I have come across this before and it was some sort of lock that had been set. I’m sorry I cant remember how I got the lock off but worth checking before you buy a pcb.

    February 28, 2018 at 8:35 am in reply to: iwdd7123 #454279
    ray.t
    Participant

    Re: iwdd7123

    Also worth making sure they are not using a wash with a slow spin

    January 5, 2018 at 2:53 pm in reply to: Bosch smv50c00gb/28 #452805
    ray.t
    Participant

    Re: Bosch smv50c00gb/28

    Yes

    January 5, 2018 at 12:58 pm in reply to: Bosch smv50c00gb/28 #452803
    ray.t
    Participant

    Re: Bosch smv50c00gb/28

    No, dry as a bone.

    August 17, 2017 at 5:11 pm in reply to: Beko WM612w #446182
    ray.t
    Participant

    Re: Beko WM612w

    Hi, no sorry I didn’t get to the bottom of it. It was a tenanted property and the landlord got them a new machine.
    Ray

    August 15, 2017 at 7:27 pm in reply to: iwde126 door latch problem #443993
    ray.t
    Participant

    Re: iwde126 door latch problem

    Did you try making the hole in the interlock a bit bigger?
    I have had another one since my last post on this and it was the only way I could get it to work.

    Ray

    March 17, 2017 at 9:03 am in reply to: Beko WM612w #446180
    ray.t
    Participant

    Re: Beko WM612w

    Hi,

    No door lock, it does nothing at all.
    I think I will have to go back and take a better look at it.

    Thanks,
    Ray

    March 16, 2017 at 9:56 pm in reply to: Beko WM612w #446178
    ray.t
    Participant

    Re: Beko WM612w

    Hi,

    Thanks but the machine had a new set of brushes about 10 months ago so I was guessing it wouldn’t need another set already. Its in a flat with only one person living there so doesn’t get a lot of use.

    Thanks,
    Ray

    December 30, 2016 at 6:57 pm in reply to: iwde126 door latch problem #443991
    ray.t
    Participant

    Re: iwde126 door latch problem

    Hi,
    It was a genuine door handle kit. I tried another 2 interlocks, pattern ones but they made no difference and they were the same as the original.

  • Author
    Posts
Viewing 15 posts - 76 through 90 (of 254 total)
1 2 3 … 5 6 7 … 15 16 17