[robbo1973]

Re: Sertronics- Walsall

I have done a few for them and they where a nightmare to get paid but did eventually,I ask for payment up front now if they want me to cover anything.

cheers chris

[robbo1973]

Re: beko ap930s

cheers for reply bob can you get part seperate and are there any part numbers.Have you any fault codes you could mail me?

robinsonrobbo1973@yahoo.co.uk

cheers chris

[robbo1973]

Re: Too Hasty

had one for a letting job last week,the outer glass had smashed so we orderd and attended with glass when asked where the handle and screws where we where told they where in the bin ❗ .idiots

[robbo1973]

Re: elux ewx14440w

thanks for replies lads been and fixed machine fault was dryer element was down to earth slightly changed and all is well again.

cheers chris

[robbo1973]

Re: leisure rangemaster 110 green

thanks

[robbo1973]

Re: leisure rangemaster 110 green

hi the numbers the cust has gave me are 5344/003236 and 1996 which is year of prod she thinks.

cheers chris

[robbo1973]

Re: Your most used tool?

i dont know about most used but i ended up losing my 8mm socket today and my last job was a e/lux split cab with lots of 8mm nightmare.My most used ar emy 2 bosch drivers the small one with the angeld attatchment and my small drill/driver.

cheers chris

[robbo1973]

Re: leisure rangemaster 110 green

thanks chris i will ring cust tomorrow

[robbo1973]

Re: neffb1691nogb/01

thats exactly what i thought i have asked the cust to keep an eye on it to see if circ fan is running when it cuts out i priced up the control unit and it is around £180 to cust.cheers for reply

[robbo1973]

Re: elux ewx14440w

cheers for reply it was late last night and it looked a nightmare to get out so going back in a couple of days.will post findings

[robbo1973]

Re: ghd straighteners

hi dave model is ghd 4.2b and it is pink.

[robbo1973]

Re: ghd straighteners

i used a meter and tested 240 to the pcb.

cheers chris

[robbo1973]

Re: ghd straighteners

this should prob be know in trade tech but here goes.i got the straighteners in today and there is power down the lead to the small pcb but the light does not come on when you switch it on.i am gonna look more tomorrow as only looked quickly as expected a lead fault. are the pcbs prone to failure or is there any other common failured thermal fuses etc?

cheers chris

[robbo1973]

Re: caple

its the only numbers i could find other than 24910.it is a single fan oven about 4 year old and i need the stat.if you know of a uni that would do it but it must go to 11 oclock position and not the normal 9.

cheers

[robbo1973]

Re: caple

model number is 230m/m

cheers

[Author]

Posts