[robbo1973]

Re: smeg A1

Thanks mate she said it used to be green and now nothing so she can’t see what she’s on ,ill get one ordered.

[robbo1973]

Re: eurolec rf600

Thanks thought as much

[robbo1973]

Re: Masterfix

I done quite a few jobs a few years back but not recently,nice people and always paid no problem

Chris

[robbo1973]

Re: May tag ac2224gekb

thanks

[robbo1973]

Re: aeg s85628sk1

robinsonrobbo1973@yahoo.co.uk

thanks

[robbo1973]

Re: aeg s85628sk1

thanks for reply ,i aint looked at it yet just wanted a heads up on any common stuff before attending.

[robbo1973]

Re: ge psg27nhmfcbb

Thanks ,I was thinking more a trade supplier I did see some on google but no part numbers etc

[robbo1973]

Re: Aeg 75238-GA1 freezer

I have this machine playing up as well it runs ok then cuts out when it wants then pulls all the way down to -18 and it’ll be fine for a day or so then temp will creep up evaporate ain’t iced up and heater etc is closed circuit,originally I could here some chattering from the pc pb when it cut out the first time so I changed the pcb and it seemed ok for about 4days then started playing up again!

Has anyone had any issues with these?

Cheers chris

[robbo1973]

Re: lamona american fridge frzr

Would that not effect the freezer temp as well?

[robbo1973]

Re: danfoss compressor

Re: danfoss compressor

Postby r600a » Wed Oct 17, 2012 2:22 pm
Hi

When using r600a compressors due to them being more efficient and a higher displacement then you can go down one size. what was r134a 1/5 can have a 1/6 on the unit. compressors are not generally measured on there wattage by engineers but by either 1/4. 1/5. 1/6. 1/8. 1/10. Which are what the manufacturers also quote.

Bryan

so on an american fridge freezer i can fit a 1/4 horsepowerr r600?

chris

[robbo1973]

Re: danfoss compressor

its a mate of mine who is a wholesaler and hes found this compressor and cant remember where it came from!

[robbo1973]

Re: Not Covered By Warranty

I can forward the moulded plug as I kept it,fault was tripping breaker as soon as switched on checked the machine and changed the plug and all is now well.

I sent a job request to Amica but they knocked it back as plug ain’t warrantied they said ,I understand if it’s the cable which has been damaged etc but a moulded plug?

I’ll forward the job details to you in a pm as well

Cheers chris

[robbo1973]

Re: Sub zero fridge freezer

think ill politely refuse this one as i just googled it and it cost more than my van!!!!!

cheers chris

[robbo1973]

Re: Not Covered By Warranty

I think you need to add that Amica won’t pay for a fault with the moulded plug as I found out the other day after being called out as it was tripping the electric and changed the manufacturers plug and all is well again however Amica say the plug is not under warranty ❓ ❓ so guess who loses out.

[robbo1973]

Re: S85628sk1

Just and update on this it turned upt to be the main pcb underneath the machine at fault.

Cheers Chris

[Author]

Posts