robbra

Forum Replies Created

Viewing 10 posts - 1,081 through 1,090 (of 1,090 total)
1 2 3 … 71 72 73
  • Author
    Posts
  • August 24, 2005 at 7:05 am in reply to: AristonAIB 16 #145459
    robbra
    Participant

    Re: AristonAIB 16

    Thanks for the help.
    Gave up in the end after another hour testing everything. Considered the hammer but she was watching
    Rob

    August 22, 2005 at 3:40 pm in reply to: AristonAIB 16 #145456
    robbra
    Participant

    Re: AristonAIB 16

    thanks Martin
    Never had this before so will try the lot although it isn’t an air leak as it is F10 as soon as switch on. Wish me luck and I will let you know.
    Rob

    August 20, 2005 at 6:31 pm in reply to: ERROR CODES ON SERVIS 6000 QUARTZ WASHER #138540
    robbra
    Participant

    Re: ERROR CODES ON SERVIS 6000 QUARTZ WASHER

    best machine ever made….mine is 15 yrs old and no bearing change…A hitachi made by Servis (the original plus K.M.)

    August 18, 2005 at 5:06 pm in reply to: Look at what you’re missing #129054
    robbra
    Participant

    Re: Look at what you’re missing

    Hi,
    can you tell me what the ejobs thing is about as 2 postcodes listed are mine?…..also can anyone tell me of decent work providers as I am fed up with 2 I work for…thanks

    April 1, 2005 at 5:37 pm in reply to: Servis Dishwasher M4608AL #129799
    robbra
    Participant

    Re: Servis Dishwasher M4608AL

    Hi, be careful as this solenoid can burn a hole in the stainless inner door and cause the machine to leak and fuse. had this twice under guarantee. Good luck
    Rob

    April 1, 2005 at 5:25 pm in reply to: Whirlpool fault codes #127662
    robbra
    Participant

    Re: Whirlpool fault codes

    Hello all and thanks for the answers. It turned out to be a broken wire making and breaking to the pump.Dont know why the fault code came up but its been working for 9 days now so must be a success.
    Thanks again

    March 6, 2005 at 10:51 am in reply to: Whirlpool fault codes #127661
    robbra
    Participant

    Re: Whirlpool fault codes

    Many thanks for all the tips. Off to the call monday so will let you know.
    Rob

    March 4, 2005 at 9:27 am in reply to: Whirlpool fault codes #127658
    robbra
    Participant

    Re: Whirlpool fault codes

    Hi,Martin, thanks
    Have checked pressure pot,pressure switch seems ok, the sump ball and hose so not sure what else can be causing it.
    Rob

    March 3, 2005 at 7:20 pm in reply to: Whirlpool fault codes #127656
    robbra
    Participant

    Re: Whirlpool fault codes

    Thanks John but what does “overflow” mean exactly and does anyone know a cure?
    Rob

    March 8, 2004 at 7:37 pm in reply to: whirlpool AWM8143GB #109558
    robbra
    Participant

    Re: whirlpool AWM8143GB

    Thanks Ted.
    Water tap is allowing plenty of water(not a quick fit type) in fact m/c fills up quickly ,about 2 mins,to a level above the bottom of the door and then runs for up to 15 mins.Everything is going well,then FH.
    Valves opening well.
    Flowmeter. Where is it,I didn’t see it.
    On refection it does seem to drain a little slowly.Could this whole problem be wrapped up with this.
    thanks.

  • Author
    Posts
Viewing 10 posts - 1,081 through 1,090 (of 1,090 total)
1 2 3 … 71 72 73