Forum Replies Created
-
AuthorPosts
-
rocker
ParticipantRe: Panasonic NA-168UX2 (W/M)
I have been looking at the parts diagram, the parts I am talking about is the valve unit that connected to the valve frame unit. I am not sure how this units work, if anyone does, can you please let me know. thanks John
rocker
ParticipantRe: Panasonic NA-168UX2 (W/M)
As mentioned I have removed sump hose, but need to release the valve frame unit, which seems to be bonded to the plastic tub.I need to know how to release this, so I can get inside it.
cheers Johnrocker
ParticipantRe: EKA Electric Oven
Cheers Dave. John
rocker
ParticipantRe: Bosch S5IE50X1GB/01 (D/W)
Thanks Mate, Should have checked it was a Neff, customer told me bosch.
rocker
ParticipantRe: zan carbons
Go onto Electrolux site, you can download a picture of the carbons fitted to the motor.
good luck Johnrocker
ParticipantRe: Bosch WAQ283S1GB/06
Thanks to you both Martin & Gary for the information. John
rocker
ParticipantRe: Beko ECOWMB81445LW
Cheers Dave. much appreciated. John
rocker
ParticipantRe: Bosch WAQ28461GB/15 FD 9403
Sorry I didn’t mention, I have checked heater resistance & motor for earth leaks. John
rocker
ParticipantRe: Electrolux D/W
Cheers Dave. John
rocker
ParticipantRe: Electrolux D/W
Update: Model ESL6114 Pic 911931004/01
rocker
ParticipantRe: Diplomat ADP8902 D/W
Cheers Dave, I will check & replace if required. John
rocker
ParticipantRe: Hotpoint WDPG9640PUK
Hi timdowing, you were spot on mate, well done. John
rocker
ParticipantRe: Tecnik TKC1255-SS Range cooker
rocker wrote:I have been asked to fit a new main oven thermostat to this cooker, I have done many on smeg range cookers ect. Just checking if this make is stright forward to dismantle, as customer tells me two companies have turned this job down. Cheers John
rocker
ParticipantRe: AEG L14840 914605004/02
cheers martin will check it out. John
rocker
ParticipantRe: Samsung WF431ABP
Hi Lawrence, thanks for reply, It is seeping but I believe its because when drawer is closed its sleeping from the closed joint between the drawer facia & base of dispenser not sealing ! but of course can’t prove that as unable to get visual look. John
-
AuthorPosts
