S1MON

Forum Replies Created

Viewing 15 posts - 121 through 135 (of 151 total)
1 2 3 … 8 9 10 11
  • Author
    Posts
  • April 30, 2007 at 4:06 pm in reply to: fault codes pdf #212215
    S1MON
    Participant

    Re: fault codes pdf

    If you could send me a copy that would be lovely cheers

    April 29, 2007 at 7:44 pm in reply to: Bosch No Display #211970
    S1MON
    Participant

    Re: Bosch No Display

    Hello mate I had similar on my wfr2866, now it seems on these models that any component failure stops the main board lighting up. Has power getting there. I found the flow sensor at fault with mine. The usual suspects were fine and in the end I just went round disconnecting the smaller components. Checking the board after disconnecting each part individually.

    I thought it was a bit strange at first but it worked.

    Also check for moisture on the board

    April 24, 2007 at 5:35 pm in reply to: Mobile phone and Sat Nav in one! #211604
    S1MON
    Participant

    Re: Mobile phone and Sat Nav in one!

    Ive got N70 and tom tom, does the job 😛

    April 23, 2007 at 9:02 pm in reply to: Bosch WFO2864 washer aborting pgm after 2 mins. #210639
    S1MON
    Participant

    Re: Bosch WFO2864 washer aborting pgm after 2 mins.

    Excellent 8)

    April 18, 2007 at 10:25 am in reply to: Washing Machine element tool #211043
    S1MON
    Participant

    Re: Washing Machine element tool

    Ill have a look at that drapper tool cheers

    April 14, 2007 at 3:27 pm in reply to: Bosch WFO2864 washer aborting pgm after 2 mins. #210635
    S1MON
    Participant

    Re: Bosch WFO2864 washer aborting pgm after 2 mins.

    If the pcb is fine i would check that ntc for fault. Was the damaged seal causing water to leak around the ntc?

    I had similar, damaged door seal and the wet ntc was causing the machine to abort cycle

    April 13, 2007 at 4:36 pm in reply to: Bosch WFO2864 washer aborting pgm after 2 mins. #210632
    S1MON
    Participant

    Re: Bosch WFO2864 washer aborting pgm after 2 mins.

    I take it you replaced the heater ntc aswell when you changed the heater. 🙂

    March 17, 2007 at 7:17 pm in reply to: BOSCH WFR2866GB/01??? #207824
    S1MON
    Participant

    Re: BOSCH WFR2866GB/01???

    😛

    March 17, 2007 at 5:26 pm in reply to: BOSCH WFR2866GB/01??? #207822
    S1MON
    Participant

    Re: BOSCH WFR2866GB/01???

    Got it sorted found the flow sensor was at fault. Tried the old board but that was coming up in German, configured the new one and now it is running great.

    Cheers Gegsy

    March 14, 2007 at 10:31 pm in reply to: BOSCH WFR2866GB/01??? #207821
    S1MON
    Participant

    Re: BOSCH WFR2866GB/01???

    ok ill have a look tomorrow see what i come back with….

    March 14, 2007 at 7:33 pm in reply to: BOSCH WFR2866GB/01??? #207819
    S1MON
    Participant

    Re: BOSCH WFR2866GB/01???

    cheers, ill recheck…….

    March 14, 2007 at 7:27 pm in reply to: BOSCH WFR2866GB/01??? #207817
    S1MON
    Participant

    Re: BOSCH WFR2866GB/01???

    yer ive check it it looks fine, in get 240v from there to the board

    March 14, 2007 at 7:16 pm in reply to: BOSCH WFR2866GB/01??? #207815
    S1MON
    Participant

    Re: BOSCH WFR2866GB/01???

    yer tried two different sockets getting 240 at the supressor

    March 10, 2007 at 5:06 pm in reply to: Zanussi DW908 #207312
    S1MON
    Participant

    Re: Zanussi DW908

    well the syphons are totally clear, newly fitted with no damage

    cab: nothing changes when i take them out! should i try running without them fitted?

    February 16, 2007 at 7:03 pm in reply to: Bosch WTA3200GB/09 #204432
    S1MON
    Participant

    Re: Bosch WTA3200GB/09

    😀

  • Author
    Posts
Viewing 15 posts - 121 through 135 (of 151 total)
1 2 3 … 8 9 10 11