Forum Replies Created
-
Posts
-
Re: WHIRLPOOL DRYER MOD. 3RLER5437KQ
Thanks chezza, what i noticed is when i keep my hand on the start button, the motor runs then begin to pulse. the centrifugal collar also pulses have checked the switch and its o.k
Re: WHIRLPOOL DRYER MOD. 3RLER5437KQ
Thanks Dave, wil check that, if both are ok, does it mean the motor is faulty?, on the diagram, heater thermostat reading is b/n 22.4k – 33.6k
cheersRe: Bosch WFF2260UK/01
Well, sometimes we do have them like that, but as far it works and you have the 12month warranty that is o.k
😆Re: “Y” PIECE HOSE CONNECTERS
The answer to your question is YES and YES, try BSH ‘Y’ piece connector, they are the BEST
Have fun 🙂Re: Bosch WFF2260UK/01
Hi first thing is you have got the ENR number wrong, but i know what appliance you are working on, you also did not mention if the module came with a coding instruction, which it should do. can you check,without recoding the module you will have umpredictable result. I beleive you have WFL2260
Re: Service Agents Required
Hi, I’m in the london area, can cover SE1, SE5, SE11, SE15, SE16, SE17,
have a friend who can cover SW area. replay to info@globalstarcommunications.comThanks
Re: Bosch TD WTE 5820GB
Hi, let me add my voice to this, first pour about 330ml of water into the water container compartment, I mean remove to container, pour the water into the machine, which will run down into the pump area. Dont put the container back yet, turn machine on, same principle as a dishwasher, pump comes on first, you should be able to see the water coming into that compartment at the back, if you dont see this then you have a blockage. Also check the condenser unit on the bottom left. Good luck.
Re: Neff H7871 combi microwave
Hi, I work for appliance care, and i have never gone back to re-replace the inner door glass, so check for any damaged enamel around the door which will cause hot spot.
