Forum Replies Created
-
Posts
-
Re: Hotpoint BWD20 Leaking at back of Drum
It appears you had a loose counter weight, however check for any play with the inner drum, if there is any movement then the inner drum has cut through the outer drum just above the heater element surrounding fixing. Closer inspection will help
Re: Hotpoint WD Series & H20 Error
Possible syphoning or check pressure hose has no puncture in it. Had one today but the p/hose had come loose
Re: hotpoint aquarious wd440
Module fault will cause and door light not to come ON and not locking. Pt. No. C00254535 but you will need smart card reader as well
Re: Hotpoint SDW60
All said and done, if the machine heats to a point and displays an error code in your case A10, make sure the machine is not foaming as this will cause the tube heating element to overheat due to less water passing through it. also check the wiring to the pressure switch / module.
Re: Is This The New Craze?
Just look at the bright side, the other day had a similar situation, had customers two little kids watching me, ask the nice gentleman to take the kids to the next room, he was puzzled, came back out and showed him the cause of the blockage/./ oh my god he screemed 😳 , the rest is history.
Re: parking nightmare
Well since the earlier thread said london excluded, I rest my case, I work in London SE1 area, congestion charge plus you know what Hmmmmmmmm! 👿
Re: Indesit WIA 101UK
Guys, this is not the fault of the potentiometer, I have tried this, the pot is ok, its the processor.
New board mate 😳Re: The strangest thing you can find in a blocked pump
Yeeh, these guys told me not to put down the fault as the cause of condoms, well u know how it goes
sene
Re: Calblock?
Hi Guys and thanks kwatt for reseting my p-word, indesit sells calblock in summer time only. have fitted a few for them BUT please dont ask me if they work or not :rolls: , in the London area descalling will do just fine.
I remain…..sene
Re: Smeg D/W – DWF410SS not starting
Yes Dave, funny thing is when start button pressed, pump jerks for 1sec, that is all.
Re: Smeg D/W – DWF410SS not starting
Hi Guys,
Sorry to drag this one back, I have gone to replace the saop dispenser this evening and the appliancce is behaving the same way, the only time drain pump comes ON is when I keep my finger on the start button, release and the pump stops. I’m suspecting the control module, any ideas will help.
🙄
sene
