senseib

Forum Replies Created

Viewing 12 posts - 241 through 252 (of 252 total)
1 2 3 … 15 16 17
  • Author
    Posts
  • March 14, 2007 at 4:54 pm in reply to: Whirlpool T/L 3RLBR8543JQ0 spinning slow #207646
    senseib
    Participant

    Re: Whirlpool T/L 3RLBR8543JQ0 spinning slow

    Any idea what the p/n for the gear box is? Although I’ve feeling it will probably write the job off!
    👿

    March 14, 2007 at 4:37 pm in reply to: Whirlpool T/L 3RLBR8543JQ0 spinning slow #207644
    senseib
    Participant

    Re: Whirlpool T/L 3RLBR8543JQ0 spinning slow

    Yep – just taken agitator off can turn the splined shaft in both direction by hand – knackered gear box then?

    Wouldnt want to be an American washer engineer!

    March 14, 2007 at 4:03 pm in reply to: Whirlpool T/L 3RLBR8543JQ0 spinning slow #207642
    senseib
    Participant

    Re: Whirlpool T/L 3RLBR8543JQ0 spinning slow

    Flexible drive looks good, pretty sure it is the clutch – but to get to it do I have to take motor off? – seems to be held by two brackets at top & bottom.

    Priced clutch-up at masterparts thanks for the p/n – spanner51

    Would appreciate any tips with this one looks tricky!

    March 13, 2007 at 11:05 am in reply to: Stoves d/w heating problem #207561
    senseib
    Participant

    Re: Stoves d/w heating problem

    model no: Q600 dw

    March 8, 2007 at 1:08 pm in reply to: Bosch D/W SRS43A02 slimline #206864
    senseib
    Participant

    Re: Bosch D/W SRS43A02 slimline

    Turned out to be the mains filter – totally disintergrated. Odd that it only blew at the end of cycle though!

    Thanks for the tips guys…
    Brian.

    March 1, 2007 at 10:30 am in reply to: HOOVER HNWL 6136 #205575
    senseib
    Participant

    Thanks Martin,

    Only use espares to check corresponding model numbers. But I do have a problem because qualtex, masterpart & homespares (the 3 trade ones I use!)
    dont appear to stock this one.
    Any suggestions? – regarding buying the board of course!

    February 28, 2007 at 9:33 pm in reply to: HOOVER HNWL 6136 #205572
    senseib
    Participant

    Need to order pre-programmed core board for this machine.
    Chris indicated core board 09200452 but espares web page shows board 09200602 for this machine. (Hoover website useless) Already bought wrong board once!
    Is it a case were either board will do – If not which one?
    Help much appreciated!
    Brian.

    February 26, 2007 at 4:44 pm in reply to: Hotpoint FDW60 d/w #205679
    senseib
    Participant

    Doh sorry! Big learning curve!

    Did print off copy of “known error codes” but this not on my copy. obviously need to print off the latest.

    Just changed pump – working fine now!

    Thanks Martin

    February 26, 2007 at 11:03 am in reply to: Zanussi FS1555W #205495
    senseib
    Participant

    Put a new pressure stat on m/c today worked a treat – thanks lads you saved me a lot of time!
    Brian.

    February 25, 2007 at 11:49 pm in reply to: HOOVER HNWL 6136 #205570
    senseib
    Participant

    Will get onto the trade parts people tomorrow
    Thanks for the advice chris.
    Brian.

    February 25, 2007 at 11:10 pm in reply to: HOOVER HNWL 6136 #205568
    senseib
    Participant

    Me thinks there is a conspircy a foot and it affects us all!!!!
    If anyone out there can advise please do?

    February 25, 2007 at 12:01 pm in reply to: Zanussi FS1555W #205493
    senseib
    Participant

    Thanks guys for your quick response, will check out pressure system tomorrow.
    New to all this but i think its great… Hope i’ve posted this reply in right area this time!

  • Author
    Posts
Viewing 12 posts - 241 through 252 (of 252 total)
1 2 3 … 15 16 17