Forum Replies Created
-
Posts
-
Re: Miele w459
Thanks for the reply Seamy. At least i have something to go on.
You dont think it could be a faulty timer then? This did cross my mind, but these machine are built like ‘Challenger tanks’ or should i say ‘Tiger tanks’ and that includes the timer.
How many other pre 1983 machines are still around, let alone working, albeit faulty at the moment?
I will let you know what I find, I know this though! – i dont want to have to drag it in.
Brian.
Re: Lumping makes together?
Is that the phone? oh sorry!.. no time to talk – I’ve got to go out and I maybe out for sometime!!! 🙂
Thought i might end up falling onto my own sword on this one.
Brian.Re: WMA – can’t get belt on?
I’ve managed it in the past by leaning the machine forward, put belt round motor pulley and oneside of belt on right hand side of drive pulley then slowly and carefully (if you value the skin on your arms!) turning the pulley in clockwise direction – just enough room if you lean it forward!
Brian.
Re: Fiber Glass Matting Repairs to Plastic Outer Tubs?
Once filled large gash with that spray on filler builders use – machine still in use as far as I am aware, above water line though.
Re: Faults rectified.
With you on this one john! Otherwise a bit selfish!
A Thank you is always nice too – only good manners after all!
Brian.Re: Indesit WDE12 module
Check connector to dryer timer, when it come a drift funny things happen.
Brian.
Re: Aeg lavamat W/D L16810 pnc 914601605/02
Just checked! & apparently this module 1321132803 comes unconfigured 😈
Really p~##ed off with modules that come unready for use – especially those without instructions on how to get them ready 👿 Pretty sure everyone else is too!!!!Can anyone tell me how to configured this one please ???
Brian.
Re: Aeg lavamat W/D L16810 pnc 914601605/02
Thanks Bob for your help. Checked all connections seem good!
When i put old module back on m/c and turn indicator to long spin:- 1600 spin speed light lit, door light green, digital display flashing 12 (mins presumably) & spin light lit. When i press start button:- one click & door locked green light goes out, display still flashing 12 nothing happens!
If i put new module back on display flashes E90 😈
Re: Bosch D/W SGS43C12GB/08
Thanks for pointing me in the right direction Martin,
I’ve just taken anti flood control apart and found it jammed – problem solved!
Brian.Re: Bosch D/W SGS43C12GB/08
Hi Martin Thanks for your help,
At the risk of appearing dumb! where is the aqua stop air tube located on the machine? It only has a standard inlet hose, not one of those with the valve fitted at the tap end.
Brian.
