[senseib]

Re: Hotpoint CTD40 tumble dryer

Definately two tocs, but didn’t see the ntc squeezed between them- which is open circuit, ordered new thermostat kit tod and that should cure it. 😀

Thanks Jim,

Brian.

[senseib]

Re: zanussi w/d zwd16270w

Thanks lads for the info, do you know the part number of the ntc by any chance i’m having trouble sourcing it?

Brian.

[senseib]

Re: zanussi w/d zwd16270w

Thanks Steve,

I didn’t know there were two thermistors fitted on the m/c that effect the dryer- cos the top one reads ok.

Brian.

[senseib]

Re: servis auto m6003

Hi lads, Thanks for your replies.

I changed the door interlock and adjusted the door but still the same. When i set the programmer to the top piosition (off position) the on light is lit and the start button is also lit, but as soon as i turn the the programme knob to any of the programmes the start button light goes out. It did work once with a recon’ module for emw, but only once.

Even bought a brand new module thinking it had to be that, but just the same with the new module. Checked the connectors all ok.

This one has got me beat unless someone else knows the solution 🙁

Brian.

[senseib]

Re: auto w/d zwd16270w

Thanks Mike for the reply, but it’s not the solenoid valve that tests out fine.

Any other thoughts anyone?

Brian.

[senseib]

Re: washer/dryer ZWD16270W

Thanks Chris.

[senseib]

Re: installing qualtex website on vista

Thanks guys, just rang them apparently you need to download this link first – for anyone having problems in the future:

http://www.microsoft.com/downloads/deta … laylang=en

Brian.

[senseib]

Re: Bosch D/W SGS43T58GB/21

Thanks for your reply guys, but i’ve already checked the float thats fine… Any other thoughts?

[senseib]

Re: Bosch D/W SGS8812GB/27

Another heater unit then ❓ 🙁

[senseib]

Re: LG auto wm-14225fd

Hi Bryan dont use Connect, but cant find any other supplier with this module in stock. The number on the module is 6870ec9121b, could you please check to see if the connect pat number above is the same 😕

Thanks,
Brian.

[senseib]

Re: LG auto wm-14225fd

Can anyone give me the part number then 🙁

[senseib]

Re: Whirlpool t/l 3RLBR8543JQ0

Thanks spanner51, what sort of a job is it to replace the drive clutch?

p.s Any chance of part numbers for drive clutch & brake lever?

Brian.

[senseib]

Re: Whirlpool t/l 3RLBR8543JQ0

spanner51 wrote:In spin mode the agitator is disengaged and is free to turn by hand. Otherwise the machine would try to agitate during spin and rip the clothes.

You might find THIS interesting.

So if i put the machine in wash mode for a couple of minutes then unplug it, if the agitator shaft can be turned by hand it’s duff – is this a defining test for the gearbox of is there another?

Brian.

[senseib]

Re: samsung p1253s

Cheers Bazza500,

Are there any trade suppliers who stock it?

Brian,

[senseib]

Re: Whirlpool auto AWM5125/3

Hi Brian, thanks for your reply. I have checked the motor, carbon brushes & loom – all ok! I suspect the fault lies with the timer/module, but before ordering would just like this confirmed, unfortunately EMW dont recon theses 🙁

Brian.

[Author]

Posts