senseib

Forum Replies Created

Viewing 15 posts - 16 through 30 (of 252 total)
1 2 3 … 15 16 17
  • Author
    Posts
  • July 19, 2012 at 1:28 am in reply to: Neff Condenser dryer R4381X1GB #378311
    senseib
    Participant

    Re: Neff Condenser dryer R4381X1GB

    I Noticed they sell the module complete with plastic covers so i’m assuming it’s not designed to come off!!

    July 18, 2012 at 4:29 pm in reply to: Neff Condenser dryer R4381X1GB #378310
    senseib
    Participant

    Re: Neff Condenser dryer R4381X1GB

    Hi Martin i have disconnected all the cables to the board and tried to get it out but abandoned it because i thought i might break it – tricky to wangle it away from the plastic cover any tips?

    May 2, 2012 at 12:25 am in reply to: Miele dishwasher G691SCI #374111
    senseib
    Participant

    Re: Miele dishwasher G691SCI

    Thanks for the telephone number eastlmark. No the wash arms are whirling round fine, plenty of pressure. But just wondering if the repair to the flow meter has anything to do with the heater being switched off prematurely?

    Brian

    May 1, 2012 at 10:52 am in reply to: Miele dishwasher G691SCI #374109
    senseib
    Participant

    Re: Miele dishwasher G691SCI

    Thanks Seamy for your reply. I’ve ordered a new heater relay so we will see if that cures it. But getting Miele parts is not easy, in the end i had to order the part from Germany on ebay – just hope it arrives!

    Would appreciate a heads up on where to get Miele parts in the uk in future if anyone knows, because i searched all over for that part?

    Brian

    September 28, 2011 at 1:35 pm in reply to: How long must you store an appliance before scrapping it? #360142
    senseib
    Participant

    Re: How long must you store an appliance before scrapping it

    So if he does take it further would i be liable for the cost of a brand new replacement machine or the true cost of a second hand machine that was faulty?

    September 28, 2011 at 12:27 pm in reply to: How long must you store an appliance before scrapping it? #360140
    senseib
    Participant

    Re: How long must you store an appliance before scrapping it

    Hi Kwatt,

    Thanks for the reply. I kept a washing machine for two months for a customer then scrapped it, he then after 3 months rang to say he wanted it back. So you’re saying he has no case against me if he tries to take it further?

    Brian.

    March 16, 2011 at 1:07 am in reply to: Gorenje auto WA50140 #347141
    senseib
    Participant

    Re: Gorenje auto WA50140

    No the door locks, the interlock wires are good!

    February 24, 2011 at 1:07 pm in reply to: lavamat 74630 pnc 91400209702 #345403
    senseib
    Participant

    Re: lavamat 74630 pnc 91400209702

    Last registered fault code E54 – got the hairdryer on it and dried out the motor and off it went.

    Thanks for the tips guys.

    January 13, 2011 at 6:04 pm in reply to: bosch d/w SHV55M03GB/56 leaking into sump #340945
    senseib
    Participant

    Re: bosch d/w SHV55M03GB/56 leaking into sump

    Thanks for the replies:

    Hoping someone would just say yes probably just this! Life’s never that simple – I’ll take the check list with me 🙁

    Brian.

    January 13, 2011 at 4:37 pm in reply to: bosch d/w SHV55M03GB/56 leaking into sump #340942
    senseib
    Participant

    Re: bosch d/w SHV55M03GB/56 leaking into sump

    ENR SHV55M03GB/56

    September 1, 2010 at 1:46 pm in reply to: Bosch wae28363gb/06 #329301
    senseib
    Participant

    Re: Bosch wae28363gb/06

    Thanks Dave.

    Brian.

    June 10, 2010 at 12:52 pm in reply to: Samsung P1253 w/d boot #322100
    senseib
    Participant

    Re: Samsung P1253 w/d boot

    Hi Don,

    Thanks for the quick reply. Just as a matter of interest what’s the cost of the genuine boot at connect and what’s the part number?

    Brian.

    May 25, 2010 at 3:23 pm in reply to: seimans dw sn25314gb/20 #321029
    senseib
    Participant

    Re: seimans dw sn25314gb/20

    A lot of the older dishwashers had cut cables at front of m/c 💡

    May 24, 2010 at 9:47 am in reply to: Repairing Hotpoint Spider? #320858
    senseib
    Participant

    Re: Repairing Hotpoint Spider?

    Keep the skin on your fingers – buy a spider & ring complete, quite cheap these days 😀

    May 20, 2010 at 12:32 am in reply to: De Dietrich D/W VZ9996U1/1 #320657
    senseib
    Participant

    Re: De Dietrich D/W VZ9996U1/1

    Hi Chris,

    Thanks for the reply – No the float microswitch is working fine, when i manually activate it there is a definate click and the drain pump works for about 20 sec and then when i release the float there’s another definate click.

    However, the machine still wont programme up – beginning to think it’s the electronics!

    Brian.

  • Author
    Posts
Viewing 15 posts - 16 through 30 (of 252 total)
1 2 3 … 15 16 17