Simon46

Forum Replies Created

Viewing 15 posts - 316 through 330 (of 2,216 total)
1 2 3 … 21 22 23 … 146 147 148
  • Author
    Posts
  • March 9, 2013 at 1:36 pm in reply to: Siemens WT46E389GB/17 drum cracked/ holed #391594
    Simon46
    Participant

    Re: Siemens WT46E389GB/17 drum cracked/ holed

    Seems to have broken up where the wheels run on the lip if that helps.
    s.

    March 6, 2013 at 7:53 am in reply to: Hotpoint DF53 heater toc problem. #274112
    Simon46
    Participant

    Re: Hotpoint DF53 heater toc problem.

    Had to go back as she said it was leaking from corners. Lower wash arm split again (replaced 3 yrs ago). Ran out of water I think. Not heard back from her since.
    Cheers guys
    .

    March 5, 2013 at 6:28 pm in reply to: Siemens WT46E389GB/17 drum cracked/ holed #391589
    Simon46
    Participant

    Re: Siemens WT46E389GB/17 drum cracked/ holed

    Qualtex have sold 35 since may.
    Part superseded as well!
    S.

    February 26, 2013 at 10:08 am in reply to: Hotpoint DF53 heater toc problem. #274109
    Simon46
    Participant

    Re: Hotpoint DF53 heater toc problem.

    Cheers jim. Hopefully i can unclip the base and find it from underneath without dragging it out!
    Simon

    February 26, 2013 at 8:19 am in reply to: Hotpoint DF53 heater toc problem. #274107
    Simon46
    Participant

    Re: Hotpoint DF53 heater toc problem.

    Where is the resettable toc located? Got one this morning that had a flooded base due to drains backing up. Now no heat after draining base. Its years since i did one. This is a stoves badged brandt.
    S.

    January 10, 2013 at 5:21 pm in reply to: Bosch WTE86304GB05 tumble dryer #298147
    Simon46
    Participant

    Re: Bosch WTE86304GB05 tumble dryer

    Thanks Martin. Been out resettable toc tripped. Reset and cleaned huge lint ball around front thermistor. Fingers crossed.
    Many thanks
    S.

    January 10, 2013 at 2:20 pm in reply to: Bosch WTE86304GB05 tumble dryer #298145
    Simon46
    Participant

    Re: Bosch WTE86304GB05 tumble dryer

    Ive got an f09 too. What does it mean?
    S.

    December 24, 2012 at 8:48 am in reply to: HBN560560B/02 oven temp calibration #386736
    Simon46
    Participant

    Re: HBN560560B/02 oven temp calibration

    Sorry a couple of jars was had (hic). What I meant to say if the oven is set to 180 and a thermometer was put in the oven and reads 200 is there any way of calibrating the oven so it is exact by some sort of test program rather than replacing the thermistor? I think that makes a bit more sense this morning!
    S.

    December 21, 2012 at 7:04 am in reply to: Stoves Cooker..cooling fan doesn’t run #238439
    Simon46
    Participant

    Re: Stoves Cooker..cooling fan doesn’t run

    Genuine resistor arrived. Replaced the motor. Old fan was 5 ohms. New fan over 100!
    S.

    December 19, 2012 at 3:41 pm in reply to: Stoves Cooker..cooling fan doesn’t run #238437
    Simon46
    Participant

    Re: Stoves Cooker..cooling fan doesn’t run

    Ordered new genuine resistor 100 ohm 11 watt as per pic. Taking ages to arrive. Would a maplins 100 ohm 10 watt work? RS dont stock them at stockport. Customer panicking. Christmas dinner looming!
    S.

    December 16, 2012 at 1:27 pm in reply to: Stoves Cooker..cooling fan doesn’t run #238434
    Simon46
    Participant

    Re: Stoves Cooker..cooling fan doesn’t run

    Ive been to one open circuit. Ordered and fitted genuine one and it went fizz and exploded. Fan shorting?
    S.

    November 13, 2012 at 4:30 am in reply to: HJA 8630 dishwasher (beko) Lamona #384343
    Simon46
    Participant

    Re: HJA 8630 dishwasher (beko) Lamona

    Had this one.
    trade-technical/hja-8630-heater-staying-when-empty-t73244.html
    Circ pump thumping on fill.
    S.

    October 31, 2012 at 5:08 pm in reply to: indesit fid201x grill element #383986
    Simon46
    Participant

    Re: indesit fid201x grill element

    On the userguide there is a model 2. On partfinder there is mk2. Found it to be C00230133.
    Thanks
    Si.

    October 18, 2012 at 4:42 am in reply to: Zanussi Zwf16070w1 #334523
    Simon46
    Participant

    Re: Zanussi Zwf16070w1

    What was the outcome? Ive got one this morning?
    S.

    October 10, 2012 at 7:49 am in reply to: HJA 8630 heater staying on when empty? #381510
    Simon46
    Participant

    Re: HJA 8630 heater staying on when empty?

    Well after all being fine for 3 wks after relay replaced heater is now on again. This one got me stumped.
    S.

  • Author
    Posts
Viewing 15 posts - 316 through 330 (of 2,216 total)
1 2 3 … 21 22 23 … 146 147 148