[Simon46]

Re: Smeg SUK62MFX fan oven motor. Obsolete?

Cheers Mark 😀

S.

[Simon46]

Re: Diplomat (Servis) ACA9202 dishwasher suppressor

Electrician has been in messing. fitted wiring as i would expect it to be as wiring has come out of plugs. No Live supply to drain pump.Has anybody got a wiring diagram? and if PCB what is part no

S.

[Simon46]

Re: Maytag Fridge Freezer not running

Fitted/configured Jazz board. All ok

S.

[Simon46]

Re: white knight 79aw belt

Many thanks.

S.

[Simon46]

Re: Bosch Dishwasher making bangs and not heating

at the back of machine one the end of the mains cable.
Unplug power first.Diagrams are here
http://www.bshcustomerservice.com/
S

[Simon46]

Re: Brandt FD292wuii loweer oven overheat protection TOC’s

Cherrs Tell. FD292WU1 is one of the model numbers of this oven.

S.

[Simon46]

Re: Bosch d/w pcb blown

Have had a few of these yes.

S.

[Simon46]

Re: Maytag Fridge Freezer not running

Did PCB fix it? I have one the same.

S.

[Simon46]

Re: AEG Lock clicks not starting

I was caught out by this! Put insulated driver push lock manually to engage. If machine starts pin in door catch has slipped down. must be out by micron as it looked ok.

S.

[Simon46]

Re: Smeg DWI710E1 cct diagram

😆 Ta Alan.

S.

[Simon46]

Re: one for the eluxgroup specialists… aw1001

Had AEG when motor trys to turn drum went to rear of machine. Belt wrapped around wiring loom 😯

S.

[Simon46]

Re: Removing creda topline cooker hob

Cheers Jim. rear panel removed found the screws attaching it. front screws out lifted hob worked from underneath. Easy.

S.

[Simon46]

Re: Tricity bendix wdr1030 bearing/seal kit

excellent cheers guys 😀 .

S.

[Simon46]

Re: Samsung SRS2029 water supply pipe

You just get the tube. How are the ends fitted to it. Are they easy to swop?

S.

[Simon46]

Re: Prima LPR450 dishwasher latch assy

Cheers Geoff.

S.

[Author]

Posts