Forum Replies Created
-
AuthorPosts
-
Simon46
ParticipantRe: Bosch sealed drum WAA24270
And those wires. Sure to break off at the connector :lesson:
S.
Simon46
ParticipantRe: Bosch Door Seals
Jeans corkscrewed on spin trapped between door glass and seal when cust closed door 😆 Looks like a bite.
S.
Simon46
ParticipantRe: Stoves 720EF grill not working
Returned today for melted switch. 😀 It worked all this time 😕
S.
February 24, 2009 at 8:30 am in reply to: Hotpoint WT400 slimline toploader door lock light flashing #276755Simon46
ParticipantRe: Hotpoint WT400 slimline toploader door lock light flashi
They fitted doorlock. Didnt work. PCB fitted and motor fuse? as reported by customer. She got her moneys worth out of Hotpoint then 😀
S.
Simon46
ParticipantRe: Zanussi FJ1296 (Jetsystem 1200)
Timer to EMW? blocked filter/hose if it is spinning ok.
S.
Simon46
ParticipantRe: whirlpool ADP4602L – not draining water
Power off drain pump off remove object. If jammed it will just hum.
S.
February 21, 2009 at 8:26 pm in reply to: New Smeg dishwasher suppressor. Where does it fit? #277941Simon46
ParticipantRe: New Smeg dishwasher suppressor. Where does it fit?
In the end i fitted it as a replacement to the terminal block and screwed it to chassis.
S.
Simon46
ParticipantRe: Fan oven element for Sarena SK312x range
What a nasty cooker. Have to remove back panel and insulation from rear to get at element housing. very itchy. Element fits a treat. Ta Bryan.
S.
February 21, 2009 at 10:59 am in reply to: New Smeg dishwasher suppressor. Where does it fit? #277939Simon46
ParticipantRe: New Smeg dishwasher suppressor. Where does it fit?
found it. it appears to go at the back instead of front
http://www.ukwhitegoods.co.uk/modules.p … ge&pid=316S.
February 21, 2009 at 10:30 am in reply to: New Smeg dishwasher suppressor. Where does it fit? #277938Simon46
ParticipantRe: New Smeg dishwasher suppressor. Where does it fit?
Help job looming at 1.30 😕
S.
Simon46
ParticipantRe: AEG 72630-W stops after 5 secs
I have another, serial number 02814405 doing the same thing. Customer reports intermitttent. Fault confirmed. Removed motor which landed on base with a thump when it came off the drum. Now works ok 😕 and carbons good.all components meggered. please can you help with how to complete diagnostics.
S.
Simon46
ParticipantRe: Samsung Spares
Dave are evaporator covers RS21DCNS still avail from shop? What price to me if so?
Simon46
ParticipantRe: Fan oven element for Sarena SK312x range
which qualtex ele is that one?
S.
Simon46
ParticipantRe: Proline fridge/freezer
Where is the capillary end located? on the back wall or down a tube?
S.
Simon46
ParticipantRe: DWI710E1 side panel IWMS
Cheers Mark
S.
-
AuthorPosts
