Forum Replies Created
-
Posts
-
Re: Zanussi D6854 – Relay/PCB
Its not. Rated at 5A/240V. Not high enough.
Am looking for one myself.S.
Re: HOTPOINT ‘Ultima’ TDC62 – no heat being produced
Could be the dreaded dryness module. Type TDC62 into search facility to reveal other posts.
Regards
SimonRe: Early Hotpoint 8596 Mistral F/F. Evap fan wont run
Thermistors. Or door not operating light switch. http://www.ukwhitegoods.co.uk/modules.p … ht=mistral
Regards
SimonRe: Whirlpool AKP951IX Selector switch/thermostat; which one
Ordered same part 481228248285. Box correct but still wrong switch in box. Again. :haier: Am ordering the wrong part 481228208648 to see what i get.
S.
Re: hotpoint ff72p mistral fr/fz
Have you given the evaporator time to get cold? Fan wont run otherwise.
S.
Re: Neff S5453X0GB/13 dishwasher dead
Fitted module 264635 swopped coding plug over all ok. ran quick wash no bangs yet 😆 .
Even comes with a new sticky front cover that fits over the facia which is destroyed when you remove the module.S.
Re: Hot main recirculation motor BOSCH SGS3302/17 8104
You could always try replacing the Capacitor. Read the microfarad value when removed.
Power off if you are going to go in.Regards
SimonRe: Neff S5453X0GB/13 dishwasher dead
Power ok through appliance. Module dead it is. No blown tracks though. I hope the new one doesnt get killed on power up.
Regards
SimonRe: Whirlpool AKP951IX Selector switch/thermostat; which one
Just for info have ordered and received 481228248285 from masterpart which is listed as far right switch assy for top oven. In the box was 481228208648 which is the one on the far left closest to clock for bottom oven but the label said 48285 on the box. The other switch 08648 is also burning up now so the dilemma is
Do i order the same part to get the other switch assy? :hmm:
Special order non returnable.Help
S.Re: Washer dryer. Plumbed in for just drying?
And then the water is pumped away so you will need a drain too.
Regards
Simon
