Forum Replies Created
-
AuthorPosts
-
Simon46
ParticipantRe: ZANUSSI DE 6854 Dishwasher, not heating.
You will need a multimeter set to ohms to check continuity of heating element.
Unplug power before checking or try repairs@ link for an engineer.Regards
SimonOctober 23, 2007 at 11:21 am in reply to: Samsung SRS2028CSS melted black stuff in fridge with pics #231798Simon46
ParticipantRe: Samsung SRS2028CSS melted black stuff in fridge
Pics here now from the new nokia n73. 😀
http://i235.photobucket.com/albums/ee14 … 007021.jpg
http://i235.photobucket.com/albums/ee14 … 007020.jpg
http://i235.photobucket.com/albums/ee14 … 007018.jpg
http://i235.photobucket.com/albums/ee14 … 007019.jpgSimon46
ParticipantRe: Whirlpool Diplomat ADP8322 Flowmeter.
Replaced my first the other day. using a magnet got the wheel to turn inside panel. no pulses measured on terminals. Reed switch faulty. Would only close/open if magnet placed directly on reed switch.
Regards
SimonSimon46
ParticipantRe: Servis TSF601SS fan oven element
Thanks mike was read off over phone by cust.
S.
Simon46
ParticipantRe: help washing machine being weird
Just saying then if the pipe is shoved too far down standpipe into u bend then syphoning may occur. Raising the pipe pointing into say the sink temporarily to test will prove this.
Regards
SimonSimon46
ParticipantRe: help washing machine being weird
Does the water drain into a stand pipe or does it connect to a spigot under the sink? If the drain hose is too low the machines water will run out as it is filling(syphoning). Therefore never getting through cycle. Just athought.
S.
Simon46
ParticipantRe: Zanussi FL1084 Drum Problem
Will only be visible on removal. Replace to cure. Power off if you are going to take job on yourself.
S.
Simon46
ParticipantRe: Zanussi FL1084 Drum Problem
If accompanied by loud rumbling on spin then bearings it will be, possibly shaft damaged as well. you may be able to move the drum up and down by hand.
Available at http://shop.ukwhitegoods.co.uk/product_ … cts_id=430S.
Simon46
ParticipantRe: Miele DA 10 L Extractor hood parts
No chance of a wiring diagram is there?
S.
Simon46
ParticipantRe: Hoover HNL2136S overfill
No but after leaving the water in drum for 5 mins watching pressure vessel saw no rise in level but when hose removed air shot out and water too. Wonder if switch has been clouted by the drum.
S.
Simon46
ParticipantRe: help washing machine being weird
When wash is selected does the drum turn slowly or does it turn fast like spin speed creating the whooshing sound?
Regards
SimonSimon46
ParticipantRe: AEG Competence B1180-1 Fan fault?!!!!! Please Help
Might it be this part?
http://shop.ukwhitegoods.co.uk/product_ … cts_id=349remove power to oven if you are going to look yourself.
Regards
SimonSimon46
ParticipantRe: Search UKWG
try clicking the search for all terms box?
S.
Simon46
ParticipantRe: Possessed Washing Machine!
Is the sink blocked from fat going down it? might be filling the machine rather than going down the drain when sink plug pulled out?
Regards
SimonSimon46
ParticipantRe: Miele DA 10 L Extractor hood parts
Thanks for info clayside
😀
S. -
AuthorPosts
