Forum Replies Created
-
AuthorPosts
-
Simon46
ParticipantRe: De Dietrich Combi Microwave MM6768U1
Just buy the customer a new microwave 😆
S.
PS got your lokring pliers yet?
Simon46
ParticipantRe: Britannia Range Model SI-CLSS-9TF
Got one Fan oven element job coming. Is there a common qualtex equiv
Regards
simonSimon46
ParticipantRe: Delonghi ESM460 grill element
ELE1400 for future reference.
:lesson:
S.Simon46
ParticipantRe: Diplomat AHY3601 oven door hinges
Done
Thanks Dave
S.Simon46
ParticipantRe: AEG 72630-W stops after 5 secs
Yes Baron the clear relay showed signs of blackness. Customer is replacing machine. Thank you for the help.
Simon
Simon46
ParticipantRe: Diplomat AHY3601 oven door hinges
Dave have you still got a pair?
S.
Simon46
ParticipantRe: Neff Built Combi Microwave/ Oven HFT 878
Try the top of the microwave. Unplug power first.
Regards
SimonSimon46
ParticipantRe: NEFF 1031-1
Element usually. Check out Repairs@ for one of our independant engineers Or Shop@ for the part. isolate Power if you are looking yourself.
Regards
SimonSimon46
ParticipantRe: AEG 72630-W stops after 5 secs
I thought i was going to fit brushes but no.Dismay at shiny commutator (FHP) detected continuity across armature tacho and two seperate fields. meggered everything passed ok. 🙁
Relay on board coil ok but contacts not? seems to drain but cant remember if drum rotates whilst draining after 5 secs.S.
December 17, 2006 at 6:24 pm in reply to: BOSCH stacked dr/wash – wash does not stay in place on spin #198104Simon46
ParticipantRe: BOSCH sack dr/wash – wash does not stay in place while s
Is ther springiness in the wood floor or does the washer rock due to one of the legs not touching floor properly?
Regards
SimonSimon46
ParticipantRe: Candy ECO1201
Something stuck in pump or pump itself. Unplug power if you are going to look yourself. Or Repairs@ for an engineer.
Regards
SimonSimon46
ParticipantRe: ariston li62 dishwasher
Yes module not selecting and also heater o/C
Module and heater curedS.
Simon46
ParticipantSimon46
ParticipantRe: Tricit Bendix AW1400
Had one with pump reading 4 ohms after pen in filter. disconnected pump got drum to turn on drain. connected new pump two flashes again. assumed module.
S.
Simon46
ParticipantRe: Hotpoint WMA belt
Had this on an indesit.
Replaced stretch belt all ok.S.
-
AuthorPosts
