Forum Replies Created
-
AuthorPosts
-
Simon46
ParticipantRe: Smeg DWF64.1S timer sticks.
No problem anymore. Customer buying new one 😥 . Will uplift and bring this to workshop for diagnosis.
S.
Simon46
ParticipantRe: Smeg DWF64.1S timer sticks.
looking at timer info it heats to 45 then washes then heats to 65 or 55.
Is this the stat in the door and are they a common failure?
45 55 65 and 85 shown on diagram but does the door stat do the 45 55 65 in one pod?Regards
SimonSimon46
ParticipantRe: Smeg DWF64.1S timer sticks.
After further diagnosis mechanical timer seems to hold for a long time two clicks after main wash heating cycle.no whirring heardfrom timer but possibly a hum. Heats get hot timer holds till temp reached then moves on 2 clicks only. left to cust to call when finished. Any ideas?
S.
Simon46
ParticipantRe: Brandt V18AAWHU freezer module
Thanks Andy.
S.
Simon46
ParticipantRe: hotpoint TDC62G killing toc’s…
Yes i have had similar but never got a go ahead on repair. one cycle and stats blown.
S.
Simon46
ParticipantRe: neff dishwasher
No joins complete wire through bend.
S.
Simon46
ParticipantRe: Belling 550 GM main oven thermostat/ door handles
Models i have listed are 550GM,BR,GR,W.
Simon46
ParticipantRe: Belling 550 GM main oven thermostat/ door handles
What colour handles are still available. Customer will go with different colour handles if suitable colour.
Regards
SimonSimon46
ParticipantRe: Brandt V18AAWHU freezer module
Thanks Andy. Are the sensors foamed in on these ie non replacable?
S.
Simon46
ParticipantRe: Indesit WDG1095W Control Dial Sticking
Glad you have it sorted.
Regards
SimonSimon46
ParticipantRe: Ariston Margherita A1635 – Paddle/Lifter removal
Do the boilwash or two.
Regards
SimonSimon46
ParticipantRe: Indesit WDG1095W Control Dial Sticking
Is the drain hose pushed too far down the standpipe (syphoning). Fills and runs out at same time. Was it professionally installed?
Unplug power if you are going to have a look :zap:
Regards
SimonOctober 3, 2006 at 6:39 pm in reply to: Ariston wd 12s Washer dryer pumping in water when drying #190618Simon46
ParticipantRe: Ariston wd 12s Washer dryer pumping in water when drying
The machine relies on a restricted cold trickle of water through a condensor. Hot heated air is blown through the drum and cold condenser and the cool surface attracts water Like a cold can of coke attracts moisture on a hot day. Now either the trickle is too high a flow wetting the clothes or the drain pump is not getting rid of the water fast enough(blockage) or as said the pipes are reversed. The drying cycle is a lengthy process and at least 90 mins should elapse before clothes are nearly dry. Unplug Power if you are going to look yourself or try Repairs@ for one of our engineers.
Regards
SimonSimon46
ParticipantRe: Indesits spinning during wash
Wool wash goes fast at the beginning after fill.
S.
Simon46
Participant -
AuthorPosts
