Forum Replies Created
-
Posts
-
Re: belling IDW 450 intermittent cleaning
ok so no joy with pressostat , but i replaced the inline pressure switch just next to the wash motor and that did the trick cheers
Re: beko dcrs 68 stopping
test program runs fine tumbles both ways not in the order specified though it tumbles clockwise fist then anticlockwise , heats, and the sensor has power to it ?
Re: whirlpool awo/d 5526 no spin
i had a good tug at the wiring on the block next to the motor and i removed all the connectors on the board to check all seem fine
Re: electrolux EW1 200I stopped
no rest for me mate , i need to get it sorted before the tennant comes back from hols tues , oh well
Re: electrolux EW1 200I stopped
nah no tracks blown Martin, all looks good on the board , i could only get a reading on one set of tags of the interlock
Re: tricity bendix WDR1041W no heat from elements
well had another nose around the wdr , no sign of any wires split or broken , pressostat seems fine both levels cutting in and out , took out the board and found burning on the back i didnt take it out completely , didnt fancy spending an hour and havin sliced arms and hands , but i guess thats the cause of no heat
Re: whirlpool adg 644ix 3 flashes on led
ok , so i had a replacement board in the van (as you do ) and plugged it in away she went ! looks like a relay prob on the board !
