[snig]

Hi , yes fitted a new pressure switch originally but fault still persists. Intermittant so difficult to find.

[snig]

Thats what im hoping. The pcb is situated on the right and side and seems to incorporate the heater relay ( cant see a separate one as in other models )

[snig]

awesome, thats just what i needed. Thanks Dave

[snig]

sorry, forgot service number 914606600/00

[snig]

Hi, did you get an answer on this as i have one doing the same. tried interlock but no different ?

[snig]

Excellant, i’ve got some reading to do tonight

[snig]

lights stay on.End light flashed

[snig]

Programme would abort after about 2 mins.Tested everything, meggered motor and element. No fault found so ordered pcb.
Left for customer to use and test before i do anything else

[snig]

Interesting about the 973 . didn’t know that. I’ll send it back. As a side note, since fitting the original board back it seems to be working ok ???

[snig]

The one i have is 1324017712 so different again. When powered up all lights flash so assumme not configured, and possibly wrong board ?
Is it possible to configure these ourselves or just send it back ?

[snig]

No fault code but suspect module as was powering fill valve even when off !!

[snig]

just to add, machine filled to level on wash and had motor action, but put to spin to empty out and it just filled, even after i cancelled the programme

[snig]

Thanks for that, very helpful. I’ll call back and have another look

[snig]

Thanks for that. Hopefully have pm’d yu my email. Let me know if you don.t get it

[snig]

This fault has reoccured. Customer call today to say fridge off again. I called end of day and temp. had risen to 14c and compressor still not fired up. Thought maybe on defrost cycle but that seems a long defrost, especially for a fridge. Power obviously still on and internal fan running ???
Anyone have any service info for these ?

[Author]

Posts