spimps

Forum Replies Created

Viewing 15 posts - 271 through 285 (of 1,200 total)
  • Author
    Posts
  • in reply to: Whirlpool Fridgefreezer model ART 462/3 ice buildup #365129
    spimps
    Participant

    Re: Whirlpool Fridgefreezer model ART 462/3 ice buildup

    If you only have partial freezing of the back panel its because of either a refrigerant leak or poor performance from the compressor.
    Engineer would be required and neither would be a cheap fix.
    BG

    in reply to: Maytag side by side #364757
    spimps
    Participant

    Re: Maytag side by side

    Tilted back at 45 degrees and 4 screws released enough gap to slide condenser out,cracked copper pipe just before joint with condenser,probably over heated during manufacture,repaired and ready to replace.
    2 man job.

    in reply to: Whirlpool 3RLEQ8033 Wiring diagram #364856
    spimps
    Participant

    Re: Whirlpool 3RLEQ8033 Wiring diagram

    Have a 3RLEQ5437JQ diagram if thats any use,pm with your details if you require it.
    BG

    in reply to: Maytag side by side #364756
    spimps
    Participant

    Re: Maytag side by side

    Have the manual but would still be interested in anyone with experience of condenser change.

    in reply to: To tall for the shelf.. #364012
    spimps
    Participant

    Re: To tall for the shelf..

    The wife must be a bit special then 🙂
    You wont have as much time on your hands once thats gone either!

    in reply to: Daewoo Multi-Flow Frost Free – leaking water #364071
    spimps
    Participant

    Re: Daewoo Multi-Flow Frost Free – leaking water

    The more uncovered food or liquid the more moisture will find it’s way to the tray.

    in reply to: What’s the most stupid things customers say? #363878
    spimps
    Participant

    Re: What’s the most stupid things customers say?

    I was confronted with aren’t you retried ? “no I’m here with my tools “,my dishwasher broke down a couple of years 😯 ago and we thought we should get it fixed.
    Christ I thought as I opened the door to find festering brown liquid still in there,”can you do anything with it”?
    Can’t believe them sometimes,would have taken a discreet pic but didn’t have the chance as I was concentrating on making a quick exit.

    in reply to: Stoves American Fridge Freezer #363948
    spimps
    Participant

    Re: Stoves American Fridge Freezer

    Could be the water solenoid valve sticking,possibly a result of not being used for a while.High water pressure might also be a possibility,valve struggles to shut off supply.
    Valve is at rear just after the water supply connection,SWITCH OFF beofre investigating.

    in reply to: Samsung door reversal #363784
    spimps
    Participant

    Re: Samsung door reversal

    The link was supposed to be to the user manual on Samsung site.
    Google search with make and model will bring it up.Doesn’t mention door reversal which user manuals usually do if it is possible.
    Perhaps one of the samsung agents on here can give you a definitive answer

    in reply to: Samsung door reversal #363782
    spimps
    Participant

    Re: Samsung door reversal

    When changing over door hang often the top hinge is swapped with the bottom which then are the opposite hand, although couldn’t say for definet on your model.
    BG
    Instructions
    http://downloadcenter.samsung.com/conte … 9C_RL33_EN[1].pdf

    in reply to: Samsung door reversal #363780
    spimps
    Participant

    Re: Samsung door reversal

    Model please ?

    in reply to: Electrolux TR1240C fridge freezer thermostat #363749
    spimps
    Participant

    Re: Electrolux TR1240C fridge freezer thermostat

    Ranco VT9 with a 1200mill length capillary would do the job,comes in a kit form.

    in reply to: work car or van #363527
    spimps
    Participant

    Re: work car or van

    Peugot Expert,loaded to the gunnels,has 11000.00 on clock but runs very nicely,decent on fuel but dont the mileage now.
    With 11 months to 65 it will be my last van so will keep it as long as possible as I will be carrying on after retirement date although even choosier than now 😉

    in reply to: Zanussi Fridge Freezer ZKR 59/39 R #362817
    spimps
    Participant

    Re: Zanussi Fridge Freezer ZKR 59/39 R

    a while since i worked on one but:
    Need to check the evaporator,its at the back of the fridge now enbedded in the back plastic wall which I think this one was,if the evaporator is totally covered in ice it could be the thermostat.
    If you can see a fitting on the back plate of the fridge where there is a screw holding a plate to the rear wall it houses the thermostat phial.
    If there is no frost around it then it could be refigerant loss if there is frost then it probably will be the thermostat.
    As it is freezing all the stuff it doesn’t sound like a refrigerant loss, stick a pic of it up if you can
    Cheers
    bg
    BG

    in reply to: Beko Ap930 not cooling enough #363613
    spimps
    Participant

    Re: Beko Ap930 not cooling enough

    You would need to switch off with door open for a minimum of 24 hours,36 would be better to ensure full clearance,sounds likle you have partially cleared it.
    If it then happens again frther investigation would be needed.

Viewing 15 posts - 271 through 285 (of 1,200 total)