[steve1]

Re: Oven Table

hi
ive had one of these tables for 25 years and its still as good as new ive taken out hundreds of ovens its a very solid table , with 3 height positions, i would not be with out one,
steve

[steve1]

Re: Lampholder assembly

hi steve
a zanussi lampholder is the same as a belling and cheaper, and in stock a connect
Lampholder connect part number is (5031681147727).
i hope this helps
regards
steve

[steve1]

Re: National pub chain paying peanuts.

HI MARTIN
I have also been doing work for graffters, for the last 10 years, never had any problems, ok to work for as long as you fill in and complete the paperwork, and send in invoices on time,
steve

[steve1]

Re: Neff U1422NOGB/03 oven

hi
its a faulty timer

[steve1]

Re: Miele W522P

HI CHRIS
if i remember right , remove soap draw then remove screws in facia ,you will see them when you take out the soap draw, open port hole door remove bolt, remove screws at bottem of front panel, then front panel swings open, to gain access to the door gasket
cheers
steve (im just round the corner from you)

[steve1]

Re: Help!! Thermostat creda cooker

hi allen
i have not got a stat but homespares centers ltd have the stat you want in stock a £17.41+vat part number OST21,
there phone number is 01204 558181

steve

[steve1]

Re: Help!! Thermostat creda cooker

hi
i might have one i will look on monday

steve

[steve1]

Re: neff oven burn marks on fridge next to it hbn9123g

hi mike
did you change the hinge recievers?
steve

[steve1]

Re: Beko s512w cooker

hi
you will find the base element has blown, you have to remove the back panel to gain access

[steve1]

Re: Miele w1613

hi
take out 2 side screws on lid then lift up the lid at the front
it will be very tight, pull upwards
steve

[steve1]

Re: Miele w1613

hi
unplug the machine,
remove the lid remove front facia and remove front panel,to gain access to hoses and pump
steve

[steve1]

Re: tecnik oven door not closing tight

HI
YOU WILL NEED 2 HINGES AND 2 HINGE RECIEVERS

[steve1]

Re: Name That Burnt Out Wreck

guess what its a zanussi

[steve1]

Re: Miele T294C

hi chris
miele Spare parts enquiries

0845 365 6605

cheers steve

[steve1]

Re: Miele T294C

hi chris

i had the same fault on the same dryer a month ago, no body could repair the board had to get new one from miele,(slightly cheaper than connect)

steve

[Author]

Posts