Forum Replies Created
-
Posts
-
Re: pcb screw size
Thought so, just ordered a few nokia ones @99p each.
Lucky as i have to do an awcm10 which has about 5 screws fixing to facia. 🙂
Re: WTA Logo
washdoctor wrote:If anyone else would like the Logo, email me:
adrian.welke@whitegoodstradeassociation.org and I’ll send one by return in JPEG format.
Ade 🙂
Hi Ade
can you send me a copy?
What format did you use for our shirt embroidery?
If its different than jpg can you send me a copy please?
Cheers
StevenRe: To boldly go…..
I will try and attend as many as i can.
As long as Ade can put up with me 😉
Steven
Re: WTA website update
kwatt wrote:All done and transferred over.
Anything that needs changing you’ll have to let me know.
Also, surveys module installed and operational.
K.
Hi all
When are we going to get the survey on line?
Did we get a email address set up to send from?
Not sure if we did manage to draft anything so would you like me draft a note up ready to send, i have alist of the people who came to the meet with majority emails on?
Something like….
I would like to take this opportunity to thank you for taking time out to attend the sept meeting, it was great to see and meet so many new faces.
We have had a lot of positive feedback already and it would benefit us if you could please take a few minutes to vist the wta website (link) to fill out a survey about how we can make future meetings even better.
We have made a lot progress in this short time, especially trying to gain recognition through the oft but we still need your help and support to move our trade association forward.thankyou again and i look forward to see you again at our next meeting in feb coventry.
Chairman
Please feel free to amend or comment.
Steven
Re: AW23 front weight
Just check that it also has not damage the pressure stat pipe?
I had one that the weight completely drop and had been rubbing against it.
I only noticed it because as i was going to rob it for another job.
Steven
Re: Kilmarnock
Good Idea
I think i can answer that for Ade 😆
F$$k that! Im driving :rotl:
Unless of course he has given up the fags by then. 😉
Or has over come his fear of flying or should i say crashing.
Re: Membership number
Anyone requiring membership number then get in touch with bazza 500 who has certificates ready to send to you.
The email sent from Amica was a blanket one sent to all, even WTA members.
The reason for it was as a requirement to carry out Amica work you need to belong to a trade organisation and not everyone sent in this information back.
So as long as you are member of the WTA, Dasa or Retra they need to know this as well as skill sets etc.. so they can update thier information.Please make sure that the number you have starts with WTA… all UKW numbers are no longer used.
HTH
Re: ISE 10 F1 fault.
Had a call today with this fault code. happened over weekend with school clothes stuck in.
Again manual says overfilling call service dept?Machine was part through 40 colour cottons when it did this.
( as we know only half load now, so could be foam issue)I told her first to press door lock as normally water would drain down enough to operate door, but this did not work. Then I got her to reset and then pump, which it pumped out ok but pump did sound noisier than normal even over the telephone did not sound right.
So I thought possible pump issue with overfoaming the cause.
She did several fills and drains while i spoke over the phone which it seems to do it ok.
She checked filter after and nothing all clear?
I will get her to try a wash again before calling and have ordered a pump just in case?
Have we verified if it is overfilling or door lock for sure?
I suppose becuase it would not initially release door button it could be a sticky door lock.Coinsidence that the pump is noisy?
Steven
Re: AWCT10L keeps filling
Bazza
I would say PCB.
How old is this one?
As you say not come across this one?
strange how its still fills when off but stops when switch registers level 😕Machine must be getting a supply from somewhere to control both these?
I assume socket wiring not reversed, if no shorts?Got to be Board.
Re: Gorenje wa62141
Thanks Ian
I have in the past tried to contact them and believe they are a waste of time, never return emails enquiries.
So did even bother this time. :rolls:
Steven
Re: Gorenje wa62141
SORRY FOUND IT.
art 173784/01 service no 73739938.
Availabilty who stocks spares?
Re: Statesman washers
0844 848 5861 after sales.
The original models as Martin said are vestel.
There are a few manufactures that used this design, matsui, soverign, but these parts are generally overpriced.
As far as i know not seen any pattern alternatives.
If its for a statesman then the prices should be resonable any way.
What parts are you tring to source?
I have only sold a fair few and had very little problems.
Steven
