[Steven]

Re: sept 2010 meeting

Hi Guys

I have had a reply from swift.

Reserve an afternoon slot for 20 mins presentation please

and book 3 persons

He has also offered £200 in to the kitty.:D 😉

HTH

Steven

Hi Steve,

I will keep to 20 minutes with the option of extending this as long as you need by having questions or expanding the talk on the day as needed.

I will sort £200 from the following towards your costs, Swift Electrical, Bosch, Indesit, GDHA. I.E. £50 from each. This will come from the Swift Electrical advertising support budgets for each brand, so you can still ask any of these companies for support directly if you wish.

I will ask Paul Harper and Simon Beard – our Central ASM to join us.

Regards

Malcolm

[Steven]

Re: AW23 soap hose

If the drum is twisted slightly, I take it is this not noticable from looking through the door and to check the gasket is sitting right?

Preventative measures will have to remove the lid on every install.

[Steven]

Re: AW23 soap hose

kwatt wrote:Okay…

The back suspension leg comes adrift/gets twisted in transit if they’re a bit rough and pushes the back of the tank up and to the left (from the front), meaning that the tank sits too close to the SD.

The rear spring may also be a bit too strong and needs “adjusted”. 😉

K.

How can legs get twisted if transit bolts are still in place:?:

Is it the engineers who installed them are throwing them about after bolts are removed 😆 😆

[Steven]

Re: AW23 soap hose

Can we check and see which versions are affected?

Perhaps we could list them to see?

There are two 1145243 and 45243086 this one has had changes made to it whether it is related to drum space?

Steven

[Steven]

Re: sept 2010 meeting

I know some manufactures suppliers have paid for lunch / food etc at past meetings.

As a matter of interest; do they offer to sponser the day or do you ask them?

Steven

[Steven]

Re: sept 2010 meeting

With the long list of other suppliers coming; have we got space for a short presentation.
I think he is interested in doing a quick talk ❗

Have we got an agenda yet ❓

How much time can we give them ❓

Steven

[Steven]

Re: Zanussi ZCE7610w

Ring regulator switch probably faulty. Usually comes with new wiring as well.

May need product code to double check part number should be. 3116724000

Does the fan oven still heat when the fan stops, or does the whole oven shut down?

Unless you are confident about undertaking this repair; suggest you get in touch with your local repairer.

contact repairs@

Dont forget to isolate mains supply ❗

[Steven]

Re: Arrow Fan Oven

If you have no circuit between the element terminals then its faulty.

The interior light cover will either be a screw thread glass cover or twist fit.

They can be tight to undo, suggest using a pair of marigolds to get a good grip to remove.

Make sure you isolate befor carring out any work ❗

HTH
Steven

[Steven]

Re: sept 2010 meeting

Hi Guys

I have had a reply from Malcolm Scott Commercial director, see his email reply below.

He is prepared to do small formal presentation if we want and also wants to know list of members to know which area mangers it will benefit.

I would imagine its a general mix?

What would you like me to tell him?

Hi Steve,

As Chairman of the KBSA (Kitchen and Bathroom Specialists Association) http://www.kbsa.org.uk I am always keen to support any industry trade associations and will be happy to come along on the 24th of September. While Swift Electrical have a full freestanding appliances offering, we are also experts on built in appliances. I am happy to come along and meet people, or to do a few minutes of formal presentation about Swift specifically or the built in market generally – what ever suits the format of your day. If it is of use, I am happy to bring along one or more of our Area Managers. Could you send over a members list to enable me to work out which Area Managers would benefit most.

We offer a fitting service to our house builder customers – all sub contracted to local fitters and we do sometimes get asked for spares, so looking at your web site, there may be quite a lot of opportunity.

Regards

Malcolm Scott

Commercial Director,

Swift Electrical.

[Steven]

Re: sept 2010 meeting

I have invited Swift Electrical.

They have a large range of appliances especially on the Amica?

They are interested and will confirm if they want to just watch or promote the services.

Steven

[Steven]

Re: New Premises

Thank you Martin.

[Steven]

Re: Maytag MDE10CSAGW Dryer

Thanks for the info Dave, will check it out. 😉

[Steven]

Re: Maytag MDE10CSAGW Dryer

Thanks for replying so quickly.

I have not seen it my self, but how is this change done?

How would it have been changed from initial setup, been working years until now?

Steven

[Steven]

Re: sept 2010 meeting

Be great to catch up with Del again, seems like ages since he showed up at a meet 😀

Now Adrian are you not talking to me 😥 :rolls:

I have sent you a couple of emails with my number to get in touch 😆

If you are going up Thursday Pm do you want come via M4 over Severn bridge could meet at Aust services or somewhere to car share 😉

and offers for anyone else coming through Bristol/Glos M4/M5 way and staying till Sat Am, do our bit for the enviro 😆

Can discuss arrangments time etc later if interested.

Steven

[Steven]

Re: new software for service/stock/data management

If its that good how come you are not forth coming with a price 😕

Is it a big secret ❓

[Author]

Posts