[streetlighter]

Re: im in hospital

thanks greg
💡
didnt think of that sitting here

paul

[streetlighter]

Re: im in hospital

thanks guys
yep all gone, took a bit of purswading about the only 3 which were half decent but they hurt like hell when i was eating me fish and chips so i was luky enough to get rid of them to.
any one konow what a fault code 1h on a bsh dw only know its a hydrosensor. picked u this email while here.
is is great 😀 😀 😀 😀 😀 😀 😛 😀 😀 😀 😀 😀

paul

[streetlighter]

Re: firenzi dw930

Thanks Brian I will try that tommorow.

Paul

[streetlighter]

Re: bosch wta4408gb/01

Thanks Greg
Will get back to you.

Paul

[streetlighter]

Re: Blown timer neff s4456n

Thanks martin
I think it was the track to the dispensor and the aparently the dispensor has not worked for a while 😕
Thanks again

Paul

[streetlighter]

Re: hotpoint dryer rear seal

Thanks Jim

Came with tape this time & all done 🙂

Paul

[streetlighter]

Re: smeg dwf64sse

Thanks Chris

Thought id be the only one up at this this time of day.
got the impellor on order for tomorow so heres hopeing 😆

Ta again

Paul

[streetlighter]

Re: old zan d/w

Thanks clive it was the loop of the sump

Ta. again

Paul

[streetlighter]

Re: old zan d/w

Thanks for the quick reply clive on wayback there now to have another go.
I will try that.

Ta

Paul

[streetlighter]

Re: zan zwf1220 carbons

Just an update
went back today and fitted 50265481007 no probs at all 😆
by the way these also fit hotpoint wma macines if you reuse the hotpoint holder 😀

Thanks

Paul

[streetlighter]

Re: wpl awm5145/2 keeps pausing

Thanks martin
This is a nasty one, several times when I twisted the board slightly it did index through the rinces but I cant find any probs on modual and I cant tell which connector is ify. When you twist the board in a certain place you also pull slighty on all the cables held in the modual casing so I cant tell which ones are loose.
I unclipped all of them, moved & taped them to no avail. It wouldn’t do it again. They all test ok with a tester.
I guess it must be a connector in that corner but is it worth another go I have already spent nearly 2 hrs there already 😯

Thanks again

Paul

[streetlighter]

Re: bosch dw door leak

Thanks to all

I will try a new lower seal it does look a bit ropey.

Ta

Paul

[streetlighter]

Re: Stoves Q600EM Resistor

Hi
not sure if the same oven but I get my dropper resistors from maplins.
Ceramic resistor 100r 10w is 40p
been fitting these for a while. If you want a 11w one go to rs components but you have to buy 5 of them and pay postage.

[streetlighter]

Re: neff oven

Hi
I had this same problem with this horshoe ele from masterpart 9 months ago 😯 (didnt check temp customer just said never cooked anything) changed for neff ones and fine no probs at all.

Paul

[streetlighter]

Re: stoves q900em cooling fan

Thanks Andy

Paul

[Author]

Posts