[suedehead1]

Re: zanussi z929t pump

I saw they claimed to have them in stock I will give them a phone and see if they do have them,
They certainly dont make them like that anymore.

[suedehead1]

Re: zanussi z929t pump

looked at that one obsolete as well,
chucked out loads of old parts recently, regretting it now,
the machine is like new or i wouldnt bother

[suedehead1]

Re: zanussi z929t pump

seems to be obsolete

[suedehead1]

Re: Bosch Wvd24520gb/03

just downloaded the manual seems it needs to be put back to the original program before the childlock will be deactivated. thats a bad design.

[suedehead1]

Re: Bosch Wvd24520gb/03

the key symbol is flashing and it says 0.01 in the display. I will go back and try every program and check the heaters thanks.
I have had them stuck on child lock before but never had this much trouble trying to get the unlocked. thanks.

[suedehead1]

Re: Bosch Wvd24520gb/03

I have the same problem with the same machine but I doesn’t matter what I do I can’t get the child lock of tried holding the clock button and also tried holding start pause but no joy

[suedehead1]

Re: indesit DIS04 dishwasher

thanks very much when i arrived the 3 lights were flashing in my fault code book i could find no reference to it.
I tried it it seemed to be washing but not heating thought it could be F11 or F13.

[suedehead1]

Re: lamona HJA8630 dishwasher

no i havent i will take a look

[suedehead1]

Re: LG Washer Dryer F1403RD6

fitted a new bottom main pcb working ok now

[suedehead1]

Re: LG Washer Dryer F1403RD6

Hi, it doesn’t have a ribbon cable just thin telephone type wires they all look ok

[suedehead1]

Re: LG Washer Dryer F1403RD6

i decided to take a chance and change the power module, unfortunately it didnt work.
I now either change the display board or the main pcb or put a match to it.

open to any suggestions

[suedehead1]

Re: LG Washer Dryer F1403RD6

cant believe a year later I see another of these with the same fault, customer wants it
fixed but i still cant work out which board is faulty.,
Any ideas welcome.

[suedehead1]

Re: hotpoint oven BS43W/1

ok thanks I will give it a try

[suedehead1]

Re: hotpoint oven BS43W/1

Cooling can works if I bypass thermostat on top of oven. I assumed part i got was correct as it is open circuit at room temperature. It was late on a Friday when I changed it and I didn’t wait to see if the thermostat worked when oven got hot. Do you have a different number for that thermostat

[suedehead1]

Re: hotpoint oven BS43W/1

hi, i didnt by pass the protection switch i bypassed the thermostat which operates the cooling fanthe cooling fan worked so i assume the thermostat was faulty

[Author]

Posts