[suedehead1]

I gave them a phone took ages to get through and speak to someone part available in 20 weeks part no. 3201714

[suedehead1]

i have had it before and you can either remove the door opening mechanism or fit a new one

[suedehead1]

Hi, I have had that before its normally the module they tend to stick at exactly the same time

[suedehead1]

I didnt know there was an electrode i will give it a try thanks guys

[suedehead1]

I decided to go with a genuine one from connect so i could send it back if it didnt work.
fitted new magnetron and it worked ok, thanks for all the help.

[suedehead1]

thanks very much cheaper than the genuine one

[suedehead1]

thats great thanks very much, its certainly cheaper than a circuit board definitely worth a try

[suedehead1]

i have had a couple of problems with Beko dryer boards where connect list different boards for the same model.

[suedehead1]

possibly the machine had been reconditioned it was in rented accomadation

[suedehead1]

I ordered the pcb for the machine and when i fitted it it lit up but it kept saying the door wasnt locked old style door lock, I fitted a solenoid door lock
and it worked. pcb was wrong one for that machine seemed to be 2 different versions.

[suedehead1]

Hi, I had the same problem 2 different boards 2 different types of door lock. I actually put a solenoid operated door lock on instead of the bimetal and it cured it.

[suedehead1]

thats great thanks very much to both of you

[suedehead1]

i have had a couple of these i was not sure wether water had got in from the top or just getting dampness from within

[suedehead1]

thanks very much

[suedehead1]

ok thanks I will need to check with connect

[Author]

Posts