Forum Replies Created
-
Posts
-
Re: BOSCH stacked dr/wash – wash does not stay in place on s
The washer is installed on the hardwood floor
Nearly always the cause of excess vibration. Keep legs as short as possible.
I have seen customers stand their m/c’s on paving slabs to solve the problem 😉
Re: Neff S4409N1GB/01 D/W
f Germany HAVE got it then why can’t WE have it too?
😡 Fatherland always seems to get priority!
Re: Neff S4409N1GB/01 D/W
:rolls: Normally the way. And they wonder why completion rates are falling 😆
Re: Bosch KGN33V00Gb/01
Best tell your customer to call BSH as it will still be under guarantee.
More than likely frozen evaporator, there are a few “problems” shall we say that can cause this.
08705678910 is the number for BSH.
Re: Neff S4409N1GB/01 D/W
also bringing both modules as well
Really annoys me when call centre tell punters things like that, cos they don’t know if the part is in stock or not. Therefore we get it in the neck when punters say “they said you’d have the part with you” 😡 .
As for the fault I’d agree that it’s probably a control module fault. Assuming that there is a 240v supply from socket. But a previously stated these are a bugger of a m/c to fault find on.
Re: Neff S4409N1GB/01 D/W
It will have a full two year guarantee regardless of registration.
Customer just needs to show purchase receipt to the engineer.
Re: Football R.I.P.
Sorry about last might, BTW. Someone was going to get a kicking after Saturdays debacle.
Don’t worry, we’re just crap that’s all 😡
Re: Bosch D/w
and the good hour to do it Crying or Very sad
Really, I find these a hundred times easier to change.
Just lie them on their back and tin base off, easy 8) .
Re: Bosch D/w
Think it is a divertor motor to alternate water between the top and bottom spray arms
Correct :tup:
Re: Bosch SPS5432GB/03 problem
If the valve is humming, then the valve is getting a feed :tup:
Have you got water upto the valve?.
Re: Bosch to/from China
seal strip to be fitted to the multiflow in the back of the fridge!
Not all KGN’s are affected :nono:
As for the WVF coming from China, news to me. I’ve worked on quite a few now and never seen any Chinese markings on any of them, and the parts are in the same old boxes they’ve always been in :con:
Re: neff oven
I assume that the fan is running ok, this problem is nearly always related to fan either running slow or not at all.
BTW if memory serves the original element will have been either 2 or 2.2kW.
HTH
Re: Bosch HBN2820GB – Oven door hinge fault
If there are no hinge carriers on it, then the frame is twisted and unrepairable.
