SWERV

Forum Replies Created

Viewing 15 posts - 286 through 300 (of 743 total)
1 2 3 … 19 20 21 … 48 49 50
  • Author
    Posts
  • March 14, 2012 at 9:31 pm in reply to: Indesit IWDE12 #370946
    SWERV
    Participant

    Re: Indesit IWDE12

    Thanks for the info.
    Merv

    March 12, 2012 at 8:51 pm in reply to: a quiet few days #370895
    SWERV
    Participant

    Re: a quiet few days

    Yes, we have been the same for the last couple of weeks. Been very busy for months, and now it has really dropped off. It’s nice to have a breather for a short while, as long as it doesn’t last too long.

    Merv

    March 8, 2012 at 8:42 pm in reply to: Belling Cooker 315wh #370661
    SWERV
    Participant

    Re: Belling Cooker 315wh

    Thanks Don, but that is what I ordered, and it is different to the one that is already on there. The one already on the machine goes all the way round, but the one that I ordered is only a three sided one.
    Merv

    March 8, 2012 at 9:46 am in reply to: Zanussi ZSF4123 #370630
    SWERV
    Participant

    Re: Zanussi ZSF4123

    Thanks Don.

    March 8, 2012 at 9:29 am in reply to: Zanussi ZSF4123 #370628
    SWERV
    Participant

    Re: Zanussi ZSF4123

    Hi Don, it should be 01.
    Regards
    Merv

    March 6, 2012 at 6:47 pm in reply to: Hoover part n/o 41014397 pcb #370506
    SWERV
    Participant

    Re: Hoover part n/o 41014397 pcb

    Hi, Did you look at the advisory note on connect.
    It states that there are 2 types, part number HVR91200606 comes programmed but without the housing.
    Don’t know if that helps.
    Merv

    March 5, 2012 at 4:59 pm in reply to: Ise dishwasher #370396
    SWERV
    Participant

    Re: Ise dishwasher

    Thanks K.

    February 22, 2012 at 4:38 pm in reply to: Miele vac S710 #369431
    SWERV
    Participant

    Re: Miele vac S710

    Thanks Don.
    Merv

    February 16, 2012 at 12:28 pm in reply to: Ise 2 Brushes #369098
    SWERV
    Participant

    Re: Ise 2 Brushes

    Cheers Dave.
    Merv

    February 9, 2012 at 5:30 pm in reply to: Hotpoint WML730 #368643
    SWERV
    Participant

    Re: Hotpoint WML730

    Sorry, should be the tech info.

    February 8, 2012 at 4:34 pm in reply to: Hotpoint dishwasher #368461
    SWERV
    Participant

    Re: Hotpoint dishwasher

    Thanks for your help. I will get that looked at.
    Merv

    February 8, 2012 at 3:08 pm in reply to: Hotpoint dishwasher #368459
    SWERV
    Participant

    Re: Hotpoint dishwasher

    Hi Johnny, the engineer has said that it will not start or do anything.
    Regards
    Merv

    February 8, 2012 at 1:53 pm in reply to: Miele W828 #367988
    SWERV
    Participant

    Re: Miele W828

    Hi Clayside. I have looked into this a bit further.
    We ordered the part number that you advised, but we have been supplied with part number 4488745. Hav we been supplied the incorrect part, or is it an updated part number?
    Thanks
    Merv

    February 8, 2012 at 8:39 am in reply to: Miele W828 #367987
    SWERV
    Participant

    Re: Miele W828

    I don’t have the number of the old board. Engineer has said that it will not physically fit and all the connections are different.
    Regards
    Merv

    February 7, 2012 at 2:52 pm in reply to: Miele W828 #367985
    SWERV
    Participant

    Re: Miele W828

    Hi,
    Can anyone confirm the part number for the pcb. We have ordered part number 4488744, but this is different to the one on the machine.
    Thanks
    Merv

  • Author
    Posts
Viewing 15 posts - 286 through 300 (of 743 total)
1 2 3 … 19 20 21 … 48 49 50