SWERV

Forum Replies Created

Viewing 15 posts - 391 through 405 (of 743 total)
  • Author
    Posts
  • in reply to: Smeg DWF66SS #321826
    SWERV
    Participant

    Re: Smeg DWF66SS

    Thanks

    in reply to: Stoves door removal #321677
    SWERV
    Participant

    Re: Stoves door removal

    No, not at the bottom of the door. they push through from the side on the inside of the door once you have slid the glass out.
    Merv

    in reply to: Stoves door removal #321674
    SWERV
    Participant

    Re: Stoves door removal

    Wsts is correct. You have to put somethimg through the holes on the hinge to lock them, then slide the inner door glass out, then there is a plastic clip either side that you remove, and then you slide the door off.
    Merv

    in reply to: Waveguide cover – does thickness matter? #321250
    SWERV
    Participant

    Re: Waveguide cover – does thickness matter?

    As long as it fits, the thickness doesn’t matter at all.
    Merv

    in reply to: neff microwave problem (h5470nogb/03 ) #320815
    SWERV
    Participant

    Re: neff microwave problem (h5470nogb/03 )

    You need to check the magntron for any sign of cracked magnets, other than that I would think it will be the inverter board or both.
    Merv

    in reply to: mIELE w408SB #320723
    SWERV
    Participant

    Re: mIELE w408SB

    Thanks Don.
    Merv

    in reply to: Panasonic parts look up anyone? #319799
    SWERV
    Participant

    Re: Panasonic parts look up anyone?

    Hi,
    sorry, after I checked with Panasonic it is obselete I’m afraid.
    Merv

    in reply to: Panasonic parts look up anyone? #319797
    SWERV
    Participant

    Re: Panasonic parts look up anyone?

    Hi,

    part number,
    E30014N30NBP

    Regards
    Mervin

    in reply to: stoves cooker 600edoa #319401
    SWERV
    Participant

    Re: stoves cooker 600edoa

    I have found this in the past as well.
    Merv

    in reply to: Miele W526 W/M #319167
    SWERV
    Participant

    Re: Miele W526 W/M

    Thanks

    in reply to: Bosch Microwave Oven turntable runs when not in use. #319066
    SWERV
    Participant

    Re: Bosch Microwave Oven turntable runs when not in use.

    Yes it was the power board that blew.
    Merv

    in reply to: Bosch Microwave Oven turntable runs when not in use. #319062
    SWERV
    Participant

    Re: Bosch Microwave Oven turntable runs when not in use.

    Is the light working? had a couple where the lamp has blown and blown tracks etc on the board, which can give this fault.
    Merv

    in reply to: Dryer #318569
    SWERV
    Participant

    Re: Dryer

    Thanks Don.
    Merv

    in reply to: Caple DI453 d/w #318074
    SWERV
    Participant

    Re: Caple DI453 d/w

    Thanks Bazza.
    Merv

    in reply to: Grand National. #282251
    SWERV
    Participant

    Re: Grand National.

    So what is her tip for the grand national????? 😆 .
    Merv

Viewing 15 posts - 391 through 405 (of 743 total)