Forum Replies Created
-
Posts
-
Re: Lamona Washing Machine HJA8514
No the water isnt siphoning, the cycle just continues to over fill? The waiste pipe is well above the water level. I have tried this with the drain pipe above the kitchen work top draining into a bowl.
Re: Meile Washing Machine W844
No float switch, the bottom of the machine is open so no anti flood device.
Re: Zanussi washer dryer ZWD14270W1
Door switch replaced problem solved. Thanks for all the replys.
Regards
Taff
Re: Zanussi washer dryer ZWD14270W1
The code displayed was definitly a “C” The door lock would not release, the machine was empty, and the pipe to the level switch was disconnected. The machine would fill to the correct levels and drain OK. The door lock would only release when I disconnected the door lock. I think I will send the module to EMW for test/repair. I will also fit a new door lock.
Re: Zanussi ZWF12070WI
Went back to the job the triaic was blown board on its way to EMW and a new door switch on order. Thanks for all the advice. Regards Taff
Re: Miele Dishwaser G1270SCV1
Regarding the new pump what sort of price are we looking at, and do you have any resistance readings for the motor?
Re: Miele Dishwaser G1270SCV1
Yes machine fills with water and it sounds as if a relay is switching when the circulation pump should be turning? The machine also drains ok.
Re: Bosch Dishwasher SGS45EO8GB/45
Thanks for the response. I have rechecked the connections and they are correct as per your reply. I think the module is the fault. Have you a wiring circuit for this machine. I am at a loss as to where the supply can be coming from, or is there a switched neutral for the motor?
Regards
Taff
Re: Bosch Dishwasher SGS45E02GB/45
Just checked the pump off the machine, no crud and the pump works OK with a suppy wired to it. The red float is not stuck I can see it moving up and down activating the overfill micro switch activating the drain pump?
Re: Whirlpool American Type Fridge Freezer Model S25DRBB33-A
Thanks for the info machine has now reset to 99{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}. However it is still not making ice. The tray is freezing the water but the ice is not being shifted to the ice compartment. The motor turns when a supply is conected to the motor assy. Any clues would be appreciated.
Taff
Re: Whirlpool American Type Fridge Freezer Model S25DRBB33-A
Went to this again today. The fault code if it is a fault code is F1{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}. The ice maker is still not working so I took it off and put a live feed to it and the motor turned the ice ejector assy. Any ideas would be helpful.
Regards
Taff 😥
Re: Whirlpool American Type Fridge Freezer Model S25DRBB33-A
Already changed the water filter. Everything works apart from making ice?
Re: Whirlpool American Type Fridge Freezer Model S25DRBB33-A
F1 is displayed on the display panel of the freezer door.
Regards
Taff
Re: Tips, Tricks & Shortcuts
Bosch dishwashers metering chambers blocked. I always carry a spare and take the old one back to my workshop and fill the affected area with Domestos toilet cleaner and leave it for a day. I then blast is out with water using a hose pipe with copper brake pipe connected to it. This enables the pipe to be directed to the blocked area of the chamber.
Taff
