Taff

Forum Replies Created

Viewing 15 posts - 46 through 60 (of 65 total)
1 2 3 4 5
  • Author
    Posts
  • November 24, 2009 at 6:27 pm in reply to: Whirlpool American Type Fridge Freezer Model S25DRBB33-A/G #303963
    Taff
    Participant

    Re: Whirlpool American Type Fridge Freezer Model S25DRBB33-A

    Tried turning off then on and opening the door 3 times but no test function carried out. Still got the F1 Code. Is there a way of cancelling the alarm code. Scratching my head on this one?
    Regards

    Taff

    November 17, 2009 at 9:24 pm in reply to: Whirlpool American Type Fridge Freezer Model S25DRBB33-A/G #303961
    Taff
    Participant

    Re: Whirlpool American Type Fridge Freezer Model S25DRBB33-A

    Thanks for the reply. How is the test program entered? I have very little info on this appliance. Your assistance is much appreciated.

    Regards

    Taff

    October 19, 2009 at 7:42 pm in reply to: Zanussi Washer Dryer WJS 1265W #299916
    Taff
    Participant

    Re: Zanussi Washer Dryer WJS 1265W

    Fault code was E73.

    Thanks for the fast reply

    August 29, 2009 at 7:41 am in reply to: Necht Dishwasher WQP12-6015 #295738
    Taff
    Participant

    Re: Necht Dishwasher WQP12-6015

    Thanks for that I was begining to think it would be a write off.

    Regards

    Taff

    July 8, 2009 at 12:04 pm in reply to: Detergent Training Ceases #193871
    Taff
    Participant

    Re: Detergent Training Ceases

    I am interested in the courses, any in the N. Yorkshire area?

    Regards

    Taff

    May 28, 2009 at 6:31 pm in reply to: Miele Dishwasher G686G #288027
    Taff
    Participant

    Re: Miele Dishwasher G686G

    Thanks for the tip, I checked the circulation pump and believe it or not there was a plastic bag stuck in the inlet!!!

    Regards

    Taff

    May 28, 2009 at 3:53 pm in reply to: Hotpoint WF310P #287805
    Taff
    Participant

    Re: Hotpoint WF310P

    New board from EMW, problem solved. Thanks for all replys

    Regards

    Taff

    May 25, 2009 at 4:41 pm in reply to: Hotpoint WF310P #287804
    Taff
    Participant

    Re: Hotpoint WF310P

    Thanks for your assistance on this one.

    Regards

    Taff

    April 30, 2009 at 6:17 pm in reply to: Bosch Tumble Dryer WTL6106GB/07 #285431
    Taff
    Participant

    Re: Bosch Tumble Dryer WTL6106GB/07

    Checked the black tube and the small plastic nozzel that fits on the end at the tank housing. I have seen the water comming out of the nozzel with the tank removed so the pump is doing the job. As I said I have no problems with the dryer in the workshop, only when the woman drives it! It could of course be an intermittant fault!

    February 6, 2009 at 1:12 pm in reply to: Whirlpool AWO/D 4605 #275615
    Taff
    Participant

    Re: Whirlpool AWO/D 4605

    Thanks Dave got the switch. Same fault occurs. Letter with cash on its way. What board is fitted to the scrapper. The part numbers on this board are 4619 714 14743 Type C1 and 461975307543. Any chance they are the same?

    Regards

    Taff

    February 2, 2009 at 9:23 am in reply to: Whirlpool AWO/D 4605 #275613
    Taff
    Participant

    Re: Whirlpool AWO/D 4605

    Thanks Dave

    Address is K Chedzoy, Ortgeard,Dishforth, Thirsk,YO7 3LP.

    Your help is much appreciated.

    February 1, 2009 at 2:02 pm in reply to: Whirlpool AWO/D 4605 #275610
    Taff
    Participant

    Re: Whirlpool AWO/D 4605

    Dear Dave, I would appreciate a door switch as electrue are currently out of stock. If you can send me one please drop a note in with the switch to let me how much cash to send.

    Regards

    Taff

    January 29, 2009 at 6:21 pm in reply to: Whirlpool AWO/D 4605 #275606
    Taff
    Participant

    Re: Whirlpool AWO/D 4605

    Tried both these. I will try a new door switch, but these don’t come cheap.

    November 12, 2008 at 7:03 pm in reply to: Electrolux EDI96150 Tumble Dryer #268054
    Taff
    Participant

    Re: Electrolux EDI96150 Tumble Dryer

    Thanks for the information it was a great help. I ended up with an error code of EC7. The pump was connected and working OK on bench test. It looks like the Pump Triac is faulty. I am assuming that the triac is located in the main circuit board? Could be an expensive job.

    November 2, 2007 at 12:28 pm in reply to: Whirlpool Dishwasher ADG7540 4 Flashes fault #232396
    Taff
    Participant

    Re: Whirlpool Dishwasher ADG7540 4 Flashes fault

    Thanks for the reply, it sorted the problem. Wrote the cause in the book of codes for future reference.

  • Author
    Posts
Viewing 15 posts - 46 through 60 (of 65 total)
1 2 3 4 5