thankevans

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 26 total)
  • Author
    Posts
  • in reply to: Amica AWCT10l #349668
    thankevans
    Participant

    Re: Amica AWCT10l

    Found a wire on the motor jack broken thanks for the advice got it all running and the bearings have gone.

    in reply to: Amica AWCT10l #349667
    thankevans
    Participant

    Re: Amica AWCT10l

    Thanks i will give that a try cheers

    in reply to: Candy fan oven FPP406x no fan or neon #337466
    thankevans
    Participant

    Re: Candy fan oven FPP406x no fan or neon

    Cheers thats a gret help, to me it seems like someone has had a fiddle, theres some odd looking spade connectors!

    Cheers

    in reply to: Candy fan oven FPP406x no fan or neon #337464
    thankevans
    Participant

    Re: Candy fan oven FPP406x no fan or neon

    any one come across this please help any ideas?

    in reply to: PJH Dishwasher #332840
    thankevans
    Participant

    Re: PJH Dishwasher

    Ive seen this dishwasher and it looks very similar to an AMICA dishwasher that has two arrows in the shape of an S for the salt indicator light.

    sorry not sure what fault is just thought this might help.

    in reply to: Has anyone got QER’s phone number. #331526
    thankevans
    Participant

    Re: Has anyone got QER’s phone number.

    Ive already done that and no reply.

    in reply to: Whirlpool AWOE8758 – F13 Error code #326273
    thankevans
    Participant

    Re: Whirlpool AWOE8758 – F13 Error code

    definatley door interlock we have done quite a few recentley machine will go dead, give it a thump door will open and it will power back up. replace door interlock.

    in reply to: bosch washing machine #321613
    thankevans
    Participant

    Re: bosch washing machine

    i did wonder broke a cople trying already supposed to be fully re conditioned machine from ebay i suspect not then!

    cheers

    in reply to: How should i deal with this? #320478
    thankevans
    Participant

    Re: How should i deal with this?

    As a large retailer of white goods and gone thru this problem many times, my advice is this, exchange the machine, you can either then get Beko to come look at it at your address or what i do, contact the wholesaler who provided you with it rant and rave fill in there uplift form and let them deal with it which works every time.

    Many times i,ve had no luck with the manurfacturer direct let the wholesaler deal with it.

    Good Luck!

    in reply to: zwf 1631 fault #320666
    thankevans
    Participant

    Re: zwf 1631 fault

    Thanks for the er…. guff? 69 pages of bedtime reading, nice!

    Cheers

    in reply to: Whirlpool stopping mid cycle. #320375
    thankevans
    Participant

    Re: Whirlpool stopping mid cycle.

    have you checked sump hose may be blocage usually socks had loads of these door seal are rubbish.

    in reply to: Whirlpool 3RGSC9455JQ3 no spin #320549
    thankevans
    Participant

    Re: Whirlpool 3RGSC9455JQ3 no spin

    Most likely gearbox clutch is all built in, probabley got one if you need one.

    Cheers

    Nathan

    in reply to: Whirlpool AWO 3561/5 #319920
    thankevans
    Participant

    Re: Whirlpool AWO 3561/5

    What do you need

    in reply to: Whirlpool awo/d4505 #319762
    thankevans
    Participant

    Re: Whirlpool awo/d4505

    un even load not enougth items, one heavy item etc.

    in reply to: Whirlpool ARC 41701x #319689
    thankevans
    Participant

    Re: Whirlpool ARC 41701x

    check that evaporator drain hole hasent been foamed over from manurfacturer.

Viewing 15 posts - 1 through 15 (of 26 total)