tintin

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 29 total)
1 2
  • Author
    Posts
  • January 9, 2007 at 3:57 pm in reply to: Beko WMB10W #199790
    tintin
    Participant

    Re: Beko WMB10W

    Thanks Mike,

    I will have a look and hope that it is that.

    Cheers.

    December 13, 2006 at 8:55 pm in reply to: Servive M9813W #197728
    tintin
    Participant

    Re: Servive M9813W

    Thanks for all the tips,I will go back and have a look and see what comes up.

    Thanks again.

    December 12, 2006 at 5:57 pm in reply to: Servive M9813W #197723
    tintin
    Participant

    Re: Servive M9813W

    OOPPSS,spelling mistake and bet you it wont.I have changed the timer,that didn’t make any diffrence.How do you adjust the pressure switch and is it ok to do that.

    October 29, 2006 at 9:12 am in reply to: Samsung washing machine problem. #191958
    tintin
    Participant

    Re: Samsung washing machine problem.

    Hi,

    Finaly got hold of the customer to go and have a look.And thanks you guys for the info.The loom has snapped where you said around the springs.Thanks again

    Tintin.

    September 19, 2006 at 7:53 pm in reply to: NEB cooker. #188900
    tintin
    Participant

    Re: NEB cooker.

    Thanks.

    September 18, 2006 at 5:24 pm in reply to: NEB cooker. #188898
    tintin
    Participant

    Re: NEB cooker.

    Hi,

    The customer is not to bothered about getting a new panel,aslong as she can get a instruction book.Hope there is a website we can find that.I have been looking on the net,but can’t find any thing.

    Thanks for the info so far.

    September 12, 2006 at 4:00 pm in reply to: Service fridge M0330S #188280
    tintin
    Participant

    Re: Service fridge M0330S

    Thats why I said it is a strange one,have never seen this problem before.I took the flap mechanism of when I turned the temp up and it was cold for a minute or so.While placing the flap back I though I will test it one more time before I put the flap back and it was not blowing up any air again,that is what made me think that it is the PCB.

    You say it might be that the fan is running to slow,but won’t you still feel some cold air coming through if the flap mechanism is of .

    Tin Tin.

    September 11, 2006 at 4:40 pm in reply to: Service fridge M0330S #188278
    tintin
    Participant

    Re: Service fridge M0330S

    Thanks Chris.

    September 10, 2006 at 11:12 am in reply to: Service fridge M0330S #188171
    tintin
    Participant

    Re: Service fridge M0330S

    Hi,

    Yes the control thermostat is working and the evaporator is clear of ice.It was a strange one,when I got there I took the panel in the freezer of to see if everything was clear,I also took the control thermostat of afer words to check that.Then I placed a magnit on the door closed sensor and there was no cold air,I then turned the temp up to 5 and placed the magnit back and there was cold air coming through,left it for 5 mins and placed the magnit back and there was no cold air again.That is what made me think taht it is the module.

    Tin Tin

    September 10, 2006 at 10:39 am in reply to: Service fridge M0330S #188169
    tintin
    Participant

    Re: Service fridge M0330S

    Sorry didn’t add the problem,fridge not cooling.

    April 14, 2006 at 7:57 pm in reply to: Portable Washing Machine #173146
    tintin
    Participant

    Re: Portable Washing Machine

    Good,idea Bryan.We should all keep those on our vans an as soon as they start mouning about waiting for parts we can show them this to borrough till we come back with the parts,that will keep the mouth shut,and we can charge them per day too.(LOL).

    Cheers.

    April 6, 2006 at 4:27 pm in reply to: Creda 48147S oven stat. #172314
    tintin
    Participant

    Re: Creda 48147S oven stat.

    Thanks again Dave.

    April 4, 2006 at 5:55 pm in reply to: Servis M3101A #171729
    tintin
    Participant

    Re: Servis M3101A

    Did check both of those,and they where fine.

    April 4, 2006 at 5:44 pm in reply to: Creda T622W tumble dryer. #171106
    tintin
    Participant

    Re: Creda T622W tumble dryer.

    Thanks for your great response.Got the relay from shop@ and replaced it today.I did the trick,you learn something new every day.

    Thanks allot for the help.

    April 1, 2006 at 7:24 pm in reply to: 11000 Members #171718
    tintin
    Participant

    Re: 11000 Members

    jim try britney looks better,can promise you.

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 29 total)
1 2