trotter

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 294 total)
  • Author
    Posts
  • in reply to: What Would You Recommend? #493631
    trotter
    Participant

    Budget – Beko or Midea
    Mid range – Bosch
    Premium – Are there any? In terms of build quality I would put Midea here!

    in reply to: MieleTDA150C #488904
    trotter
    Participant

    Hmmmm ….questioning myself now. What is confusing me is that it works with one damp tea towel, but as soon as I put a full load in, it comes up with ’empty container’ after a few minutes.
    Iam assuming that the sensor in the pump housing is faulty, but I guess it could also be the control unit.

    in reply to: MieleTDA150C #488902
    trotter
    Participant

    Does it sound like the pump to you Dave?

    in reply to: Neff oven clock reset E-nr B1ACE4HN0B/10 #477430
    trotter
    Participant

    It was the timer boards!! faulty capacitors :rolleyes:

    in reply to: LG direct drive LE ERROR CODE #477309
    trotter
    Participant

    Sounds like a broken wire.

    in reply to: Neff oven clock reset E-nr B1ACE4HN0B/10 #477428
    trotter
    Participant

    Thanks for the thoughts Jem,

    1. I’m pretty sure they’re ok …..
    2. ?? not sure
    3. I am fairly sure I did that and because the cooling fan is running with the lamp on I didn’t see that as a potential issue.
    4. Definitely tried disconnecting that cable and no difference.

    It could be an earth fault on the supply I guess, given that it effects both ovens REALLY strange and annoying fault!!!

    in reply to: Whirlpool trade Parts #470217
    trotter
    Participant

    It is definitely Whirlpool trade Dave, or actually perhaps I should have said “Hotpoint”
    https://b2b.hotpoint.co.uk/

    in reply to: Electrolux Cooker hinge #467174
    trotter
    Participant

    Thanks all ….New door it is then 🙁

    trotter
    Participant

    Yes earth leakage done on heater and motor before testing and after several test runs ….good point though!

    trotter
    Participant

    It cuts out quicker Dave

    in reply to: Card Payment Machine. #415149
    trotter
    Participant

    We’ve been using Qixpay.com for a good few years now, hand held device similar to the desktop machine, excellent mobile signal – it is a multi sim and people recognise the machine and trust it! I guess not plugging into your phone helps with both the trust element and battery life of your phone.

    Paying £25 per month for the terminal which may sound a lot BUT it’s SO convenient. Commission charges are approx 1.5 – 2{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} depending on card, I always say to the customer “I’m able to take cash, bank transfer or debit card” debit card is then normally the method of payment although we do get some credit cards and bank transfers.

    I’m often in a poor signal area but our machine normally picks up a signal from one of the networks. It is important that you choose the right mobile terminal for that signal issue, happy to help if anyone needs more info.

    in reply to: Washing machine transport cover #462399
    trotter
    Participant

    Those padded covers were excellent and still would be, for transporting recon machines to customers 😉

    in reply to: BEKO WDX8543130W Washer Dryer no display #461614
    trotter
    Participant

    electrofix wrote:does sound like the main board is faulty

    if you want the tech let me have an email

    Dave

    Messaged email ad CHEERS!!

    in reply to: White Knight C44A7W fan blade fitting #455209
    trotter
    Participant

    Re: White Knight C44A7W fan blade fitting

    I must admit I didn’t try the lube Dave, but I did try the toffee hammer with a piece of wood ….it broke AGAIN!!! :eeek:

    in reply to: Replacement integrated fridge door hinges #454934
    trotter
    Participant

    Re: Replacement integrated fridge door hinges

    Stick with the sliding hinges!

Viewing 15 posts - 1 through 15 (of 294 total)