Forum Replies Created
-
Posts
-
Re: Zanussi Frost free – ZX55/4W – Fridge warm after 1 month
I’ll try fitting new defrost timer and see if it does the trick.
Re: Beko frost free CA5411FFW – Fridge and freezer defrostin
Bang on Dave,
First time I’ve seen a stat that was faulty but not o/c.Cheers
Re: Zanussi Frost free – ZX55/4W – Fridge warm after 1 month
Thanks for the reply’s.
I was wondering if putting an adjustable defrost timer, set to a shorter interval would do the trick?
I think this unit has a vt9 stat fitted, would fitting a Vx0 with the higher defrost temp work?Re: Hoover fridge freezer HCA300FK – PCB
Which is the .100 uf cap?
is it C6 rectangle cap with ‘J’ printed on it ?
PCB = 91201739.Re: Hoover fridge freezer HCA300FK – PCB
The customer reported that the light works but goes off when the dial is turned to 0, the compressor still runs on O
According to what I can tell from the service manual the amber led should be flashing if the thermalprobe is faulty.
Do you know what component fails on the PCB?Re: Hotpoint frost free Mod – 8596 – Service manual
I’am still learning how these frost free fridges work,
If you could email all 30 pages that would be great.Re: Hotpoint frost free Mod – 8596 – Service manual
John,
I’m looking to build a test rig for the PCB so I need a wiring diagram,
values of the Temp sensors resistance etc.The two PCB’s I’am working on have damage to the board from 3 x 330 ohm
resistors that look to be over heating.Re: Hoover fridge freezer HCA300FK – PCB
Thanks for the info,
I cannot remember how to work the self test.
Does anyone know where I can get a Service manual?Re: How do you drain off a flooded WMA?
Shove a Car pump on the end of the drain hose and pump like buggery,
works every time.Argos – Vento Track Pump. 0362827
